Abstract:Vortex-free high-speed stir casting (VFHSC) methodology can achieve uniform dispersion of particles in melt without air entrapment for fabricating particle reinforced composites, and it has been proved to be feasible for preparing micron-composites by this methodology. In this work, in order to study deeply on particles in nano-size magnitude in composites by this methodology, the preparation of 1.5 vol.% Nano-Al 2 O 3p /Al–Cu–Mg–Si composite is also investigated. The proper stirring parameters for ideal particle dispersion are determined to prepare the materials. Porosity of the composite can be limited to 0.147 % under the VFHSC methodology. The composition and microstructure of ingots, including the incorporation of Al 2 O 3 particles as well as the morphology of precipitated phases, are examined by OM, XRD, SEM, TEM, HRTEM and EDS. The nano-particles are incorporated ideally in the matrix with restricted aggregation and sedimentation, and the well-bounded Al 2 O 3 –Al interface possesses semi-coherent interface. Moreover, the VFHSC 1.5 vol.% Nano-Al 2 O 3p /Al–Cu–Mg–Si composite exhibits obvious strengthening, limited ductility reduction, higher hardness as well as better wear resistance than those of matrix, validating the efficacy of the VFHSC methodology on fabricating 1.5 vol.% Nano-Al 2 O 3p /Al–Cu–Mg–Si composite. The work proves that incorporating nano-particles in Al matrix by VFHSC methodology is feasible and efficient. The work presented in this paper proposes a viable approach for the fabrication of nanocomposites using the stir casting method, thereby offering valuable insights for further research on stir casting technology.

IN-SITU SYNTHESIS AND GROWTH OF SPHERICAL VC PARTICLES IN Fe-C-Cr-V ALLOY

MA-SPS-HIP Technique for Vanadium Alloys Preparation

Evolution from Amorphous to Nanocrystalline and Corresponding Magnetic Properties of Fe-Si-B-Cu-Nb Alloys by Melt Spinning and Spark Plasma Sintering

In Situ Reaction Synthesis And Mechanical Properties Of V2alc

The Crystallization Kinetics Study of Finemet-Co Amorphous Alloys

Enhancement of the mechanical properties of ultrafine-grained WC-Co cemented carbides via the in-situ generation of VC

Synthesis and Characterization of In Situ Dendritic/Particulate α-Al(Fe,TM)Si Phase Reinforced Al Matrix Composites

WC-VC/Cr3C2 composite powders prepared by a carbothermic reduction-carburization process

Study of Microstructure of Coarse-grain Tungsten Carbide Composite Produced by In-Situ Metallurgy Reaction

Crystallization Kinetics and Magnetic Properties of Fe73.5si13.5b9cu1nb1v2 Nanocrystalline Powder Cores

<i>In Situ</i>Reaction Synthesis and Mechanical Properties of V<sub>2</sub>AlC

Strengthening FeCrNiCu high entropy alloys via combining V additions with in-situ TiC particles

Nano-Al2O3 Particle Incorporated in Al Matrix Composite by Vortex-Free High-Speed Stir Casting

One-pot Synthesis of Sb-Fe-carbon-fiber Composites with in Situ Catalytic Growth of Carbon Fibers

In-situ Production and Microstructure of TiC/Fe3 Al Composites

Investigating Microstructural Evolution and Its Influence on Tribological Behaviors of In-Situ Formed VCp Reinforced Iron-Based Composites with Variable Mn Content

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

In-Situ Synthesis, Microstructure, and Mechanical Properties of TiB2-Reinforced Fe-Cr-Mn-Al Steel Matrix Composites Prepared by Spark Plasma Sintering

An investigation on the microstructural stability of rapidly solidified AlFeVSi alloy ribbon

Preparation of Large-scale Textural Microstructure Fe-based Metallic Composite by Centrifugal-SHS Method

Microstructures and mechanical properties of in-situ FeCrNiCu high entropy alloy matrix composites reinforced with NbC particles