Abstract:Incorporating carbon nanotubes (CNTs) into Al-Si alloy to prepare in-situ SiC/Al-Si composites enhances thermal conductivity (TC) and reduces the coefficient of thermal expansion (CTE). However, challenges include CNTs aggregation and uneven SiC distribution. This study uses fluidized bed chemical vapor deposition (FBCVD) to achieve uniform CNTs coverage on Al-50Si powder. Subsequent powder hot extrusion and heat treatment above the eutectic temperature enable a gradual reaction between CNTs and Al/Si atoms, resulting in uniformly dispersed SiC within the SiC/Al-50Si composite. The formation mechanism of in-situ SiC particles and their impact on the microstructure, thermal and mechanical properties of the composite are further investigated. The formation process involves a two-step chemical reaction: lamellar Al 4 C 3 phases transform into lamellar eutectic SiC + Al phases, which then transition into polyhedral SiC particles through epitaxial growth. This in-situ formation of SiC particles also impedes Si growth during heat treatment, refining Si particles and enhancing the composite's properties. The resulting in-situ SiC/Al-50Si composite exhibits excellent thermal and mechanical properties, including a high TC of ∼162 Wm -1 K −1 , a low CTE of ∼ 8.7 × 10 -6 /K, and a good bending strength of approximately 253 MPa at room temperature.

<i>In Situ</i>Reaction Synthesis and Mechanical Properties of V<sub>2</sub>AlC

In Situ Reaction Synthesis And Mechanical Properties Of V2alc

FLEXURAL STRENGTH OF IN-SITU REACTION PROCESSED Al2O3-Al3Ti-Al COMPOSITES

Microstructure and Properties of Bulk Ta2AlC Ceramic Synthesized by an in Situ Reaction/hot Pressing Method

Synthesis and characterization of submicro-sized V2AlC ceramics by a two-step modified molten salt method

Synthesis and Mechanical Properties of High-Purity Cr2alc Ceramic

<i>In Situ</i>Reaction Synthesis, Electrical and Thermal, and Mechanical Properties of Nb<sub>4</sub>AlC<sub>3</sub>

In-Situ Reaction Synthesis And Decomposition Of Ta2alc

Synthesis and Elastic Properties of V2alc Thin Films by Magnetron Sputtering from Elemental Targets

In Situ Reaction Synthesis, Electrical And Thermal, And Mechanical Properties Of Nb(4)Alc(3)

In Situ Synthesis of Ti2AlC–Al2O3/TiAl Composite by Vacuum Sintering Mechanically Alloyed TiAl Powder Coated with CNTs

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and mechanical properties of Ti3(Al,Ga)C2/Al2O3 composites prepared by in situ reactive hot pressing

Mechanical and Thermal Properties of Antiperovskite Ti3alc Prepared by an in Situ Reaction/Hot-Pressing Route

In Situ Synthesis and Properties of Ti<sub>3</sub>AlC<sub>2</sub>/TiB<sub>2</sub> Composites

Reactive Synthesis of Polycrystalline Ti3AlC2 and Its Sintering Behavior

Fabrication and Properties of Ti<sub>3</sub>AlC<sub>2</sub>-Based Ceramics by Two-Step Method

Fabrication and properties of Ti3AlC2-based ceramics by two-step method

In-situ synthesis and microstructural evolution of a SiC reinforced Al-50Si composite exhibiting exceptional thermal properties

Preparation of Al<sub>2</sub>O<sub>3</sub>/TiSiC<sub>2</sub> Multilayer Materials by In-Situ Synthesis

Growth and thermal stability of (V,Al)2Cx thin films