Abstract:Abstract The synthesis, microstructure, and properties of high purity dense bulk Mo 2 TiAlC 2 ceramics were studied. High purity Mo 2 TiAlC 2 powder was synthesized at 1873 K starting from Mo, Ti, Al, and graphite powders with a molar ratio of 2:1:1.25:2. The synthesis mechanism of Mo 2 TiAlC 2 was explored by analyzing the compositions of samples sintered at different temperatures. It was found that the Mo 2 TiAlC 2 phase was formed from the reaction among Mo 3 Al 2 C, Mo 2 C, TiC, and C. Dense Mo 2 TiAlC 2 bulk sample was prepared by spark plasma sintering (SPS) at 1673 K under a pressure of 40 MPa. The relative density of the dense sample was 98.3%. The mean grain size was 3.5 μm in length and 1.5 μm in width. The typical layered structure could be clearly observed. The electrical conductivity of Mo 2 TiAlC 2 ceramic measured at the temperature range of 2–300 K decreased from 0.95 × 10 6 to 0.77 × 10 6 Ω–1·m–1. Thermal conductivity measured at the temperature range of 300–1273 K decreased from 8.0 to 6.4 W·(m·K) –1 . The thermal expansion coefficient (TEC) of Mo 2 TiAlC 2 measured at the temperature of 350–1100 K was calculated as 9.0 × 10 –6 K –1 . Additionally, the layered structure and fine grain size benefited for excellent mechanical properties of low intrinsic Vickers hardness of 5.2 GPa, high flexural strength of 407.9 MPa, high fracture toughness of 6.5 MPa·m 1/2 , and high compressive strength of 1079 MPa. Even at the indentation load of 300 N, the residual flexural strength could hold 84% of the value of undamaged one, indicating remarkable damage tolerance. Furthermore, it was confirmed that Mo 2 TiAlC 2 ceramic had a good oxidation resistance below 1200 K in the air.

Synthesis and Mechanical Properties of High-Purity Cr2alc Ceramic

Effect of Cr7C3 on the Mechanical, Thermal, and Electrical Properties of Cr2AlC

Mechanical Properties and Thermal Stability of Carbide Dispersion Strengthened CLF-1 Steel

In Situ Reaction Synthesis And Mechanical Properties Of V2alc

<i>In Situ</i>Reaction Synthesis and Mechanical Properties of V<sub>2</sub>AlC

Ultra-toughened Al2O3–TiC–Co ceramic

Synthesis, microstructure, and properties of high purity Mo2TiAlC2 ceramics fabricated by spark plasma sintering

Fabrication and properties of Ti3AlC2-based ceramics by two-step method

Fabrication and Properties of Ti<sub>3</sub>AlC<sub>2</sub>-Based Ceramics by Two-Step Method

In Situ Synthesis, Structure, and Properties of Bulk Nanolaminate Yal3c3 Ceramic

Experimental study of covalent Cr3C2 with high ionicity: Sound velocities, elasticity, and mechanical properties under high pressure

Mechanical and Thermal Properties of Antiperovskite Ti3alc Prepared by an in Situ Reaction/Hot-Pressing Route

Microstructure evolution of Cr 2 AlC MAX phase under a graphite bed between 1100 °C and 1500 °C

Synthesis and Mechanical Properties of Nano-Layered Composite

High entropy six-component solid solution (Ti0.5Nb0.15Zr0.1Mo0.1Ta0.1W0.05)2AlC: A novel synthesis approach and its mechanical properties

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Manufacturing of High Purity Cr2AlC MAX Phase Material and Its Characterization

Synthesis, Microstructure and Mechanical Properties of a MoAlB Ceramic Prepared by Spark Plasma Sintering from Elemental Powders

Mechanical Properties and Microstructure of Al2O3/TiAl in Situ Composites Doped with Cr

Mechanical Properties and Oxidation Behavior of Ti-Doped Nb4alc3

Mechanical Properties and Microstructure of Al2o3/Tial in Situ Composites Doped with Cr2o3