Abstract:A novel composite with in situ synthesized of Ti2(Al,Si)C solid solution reinforced Al matrix was fabricated in Ti2AlC-Al-Si material system via one-step solid solution and densification by spark plasma sintering method. The relationship between microstructure, phase composition and mechanical properties of composites doped with different Si content (1, 2 and 3 wt%) and fabricated at different sintering temperature (580, 570 and 560 °C) were investigated. The optimal sintering temperature of composites with increasing the Si addition was carefully determined. The interface reaction was effectively regulated under different Si additions. X-ray photoelectron spectroscopy (XPS) and nanoindentation test results reveal that Si formed SiC covalent bond in Ti2(Al,Si)C solid solution, and with the increase of Si addition, the hardness and elastic modulus of Ti2(Al,Si)C increased by 6.75% and 4.23% in the composites prepared by the three optimal processes. The tensile tests show that when the addition of Si was 2 wt% and the sintering temperature was 570 °C, the composites demonstrated an optimal balance of strength and plasticity. The ultimate tensile strength reached 226 MPa with a strain of 14.33%. Moreover, when added to 3 wt% and the sintering temperature decreased to 560 °C, the composite achieved a significant improvement in elongation. The performance are mainly attributed to the strengthening of Ti2(Al,Si)C solid solution and the regulation of interface reaction.

Mechanical Properties and Microstructure of Al2o3/Tial in Situ Composites Doped with Cr2o3

Mechanical Properties and Microstructure of Al2O3/TiAl in Situ Composites Doped with Cr

Microstructure and mechanical properties of Al2O 3/TiAl in situ composites doped with Fe2O3

In Situal3ti–al2o3 Intermetallic Matrix Composite: Synthesis, Microstructure, and Compressive Behavior

FLEXURAL STRENGTH OF IN-SITU REACTION PROCESSED Al2O3-Al3Ti-Al COMPOSITES

Microstructure and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>/TiAl <i>In Situ</i> Composites Doped with Fe<sub>2</sub>O<sub>3</sub>

Microstructure and Mechanical Properties of Al<sub>2</sub>O<sub>3</sub>/TiAl <i>in Situ</i> Composites Doped with Fe<sub>2</sub>O<sub>3</sub>

Effect of Sintering Temperature on Microstructure and Mechanical Properties of Al2O3/TiAl In-Situ Composites

Effect of sintering temperature on microstructure and mechanical properties of Al2O3/TiAl in situ composites

Microstructure and Mechanical Properties of Ti2AlC-reinforced TiAl Composites

Microstructure and mechanical properties of Ti3(Al,Ga)C2/Al2O3 composites prepared by in situ reactive hot pressing

Reaction mechanism and microstructure evolution of superhigh strength in-situ TiC/Ti composite based on Cr 2 AlC-Ti system

Processing, Microstructural Characterization and Mechanical Properties of in Situ Ti3AlC2/TiAl3 Composite by Hot Pressing

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Microstructure and mechanical properties of TiB 2 -Al 2 O 3 composites

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Microstructure and Mechanical Properties of TiB2-Al2O3 Composites

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Microstructure and High-Temperature Mechanical Properties of CrMnFeCoNi/TiAl Composites Prepared by Powder Metallurgy

Reinforcing and Toughening of Tial Composites by Doping Sm2o3

Microstructure characterization and mechanical properties of in situ synthesized Ti2(Al,Si)C reinforced Al composites