Abstract:Using spark plasma sintering, Ti3AlC2/W composites were prepared at 1300 degrees C. They contained core-shell microstructures in which a TixW1x shell surrounded a W core, in a Ti3AlC2 matrix. The composite hardness increased with W addition, and the hardening effect is likely achieved by the TixW1x interfacial layer providing strong bonding between Ti3AlC2 and W, and by the presence of hard W. Microstructural development during high-temperature oxidation of Ti3AlC2/W composites involves -Al2O3 and rutile (TiO2) formation 1000 degrees C and Al2TiO5 formation at similar to 1400 degrees C while tungsten oxides appear to have volatilized above 800 degrees C. Likely due to exaggerated, secondary grain growth of TiO2-doped alumina and the effect of W addition, fine (<1m) Al2O3 grains formed dense, anisomorphic laths on Ti3AlC2/5wt%W surfaces 1200 degrees C and coarsened to large (>5m), dense, TiO2-doped Al2O3 clusters on Ti3AlC2/10wt%W surfaces 1400 degrees C. W potentially affects the oxidation behavior of Ti3AlC2/W composites beneficially by causing formation of TixW1x thus altering the defect structure of Ti3AlC2, resulting in Al having a higher activity and by changing the scale morphology by forming dense Al2O3 laths in a thinner oxide coating, and detrimentally through release of volatile tungsten oxides generating cavities in the oxide scale. For Ti3AlC2/5wt%W oxidation, the former beneficial effects appear to dominate over the latter detrimental effect.

Microstructure evolution of Cr 2 AlC MAX phase under a graphite bed between 1100 °C and 1500 °C

B22-P-17Evolution of the MC Carbide in Nickel-base Single Crystal Superalloy Exposing at 950 °C

Effect of High Temperature Annealing on the Microstructure and Thermal Shock Resistance of Tungsten Coatings Grown by Chemical Vapor Deposition

Manufacturing of High Purity Cr2AlC MAX Phase Material and Its Characterization

Effects of Heat Treatment on Structure Transformation of Cr/Al Composite Coatings

Effect of annealing on the microstructure, mechanical and electrochemical properties of CrAlC coatings

Synthesis and Mechanical Properties of High-Purity Cr2alc Ceramic

Reactive Synthesis for Porous (Mo2/3Y1/3)2AlC Ceramics through Mo, Y, Al and Graphite Powders

Microstructure evolution and elemental diffusion behavior near the interface of Cr2AlC and single crystal superalloy DD5 at elevated temperatures

Microstructural and compositional design of Cr2AlC MAX phases and their impact on oxidation resistance

Mechanical Characterisation of the Protective Al$_2$O$_3$ Scale in Cr$_2$AlC MAX phases

The effect of milling time and heat treatment on the synthesis of the Cr2AlC MAX phase

Microstructure and high-temperature oxidation behavior of Ti3AlC 2/W composites

Microstructure evolution and cyclic oxidation performance of Cr2AlC transition layer as active diffusion barrier for Ni-based superalloy and NiCrAlY coating

Microstructural evolution and thermal stability in a nanocrystalline lightweight TiAlV0.5CrMo refractory high-entropy alloy synthesized by mechanical alloying

Microstructures and Properties of WC-10 wt.%CoCrFeNiAlx Composite Cemented Carbides

Microstructure and properties of Cu-Cr-Nb/graphite composites with high softening temperature

Thermal stability and selective nitridation of Cr2AlC in nitrogen at elevated temperatures

Fabrication of Cr2AlC Coating from the Cost-Efficient Cr-Al-C Target by Arc Ion Plating

Microstructure, mechanical properties and high-speed dry-cutting performance of AlCrSiCN composite coatings

Preparation and performance of MAX phase Ti3AlC2 by in-situ reaction of Ti-Al-C system