Abstract:Abstract The synthesis, microstructure, and properties of high purity dense bulk Mo 2 TiAlC 2 ceramics were studied. High purity Mo 2 TiAlC 2 powder was synthesized at 1873 K starting from Mo, Ti, Al, and graphite powders with a molar ratio of 2:1:1.25:2. The synthesis mechanism of Mo 2 TiAlC 2 was explored by analyzing the compositions of samples sintered at different temperatures. It was found that the Mo 2 TiAlC 2 phase was formed from the reaction among Mo 3 Al 2 C, Mo 2 C, TiC, and C. Dense Mo 2 TiAlC 2 bulk sample was prepared by spark plasma sintering (SPS) at 1673 K under a pressure of 40 MPa. The relative density of the dense sample was 98.3%. The mean grain size was 3.5 μm in length and 1.5 μm in width. The typical layered structure could be clearly observed. The electrical conductivity of Mo 2 TiAlC 2 ceramic measured at the temperature range of 2–300 K decreased from 0.95 × 10 6 to 0.77 × 10 6 Ω–1·m–1. Thermal conductivity measured at the temperature range of 300–1273 K decreased from 8.0 to 6.4 W·(m·K) –1 . The thermal expansion coefficient (TEC) of Mo 2 TiAlC 2 measured at the temperature of 350–1100 K was calculated as 9.0 × 10 –6 K –1 . Additionally, the layered structure and fine grain size benefited for excellent mechanical properties of low intrinsic Vickers hardness of 5.2 GPa, high flexural strength of 407.9 MPa, high fracture toughness of 6.5 MPa·m 1/2 , and high compressive strength of 1079 MPa. Even at the indentation load of 300 N, the residual flexural strength could hold 84% of the value of undamaged one, indicating remarkable damage tolerance. Furthermore, it was confirmed that Mo 2 TiAlC 2 ceramic had a good oxidation resistance below 1200 K in the air.

Synthesis, Microstructure and Mechanical Properties of a MoAlB Ceramic Prepared by Spark Plasma Sintering from Elemental Powders

Microstructure, Compressive Performance and Wear Resistance of Pure Molybdenum Additively Manufactured Via Laser Powder Bed Fusion

Making high-performance MoAlB ceramics by hot pressing combustion-synthesized powders

Synthesis, microstructure, and properties of high purity Mo2TiAlC2 ceramics fabricated by spark plasma sintering

Preparation, microstructure and mechanical properties of MoAlB-0.15% Si ceramics with superior strength and toughness

Synthesis, microstructure and properties of MoAlB MAB phase films

Synthesis and characterization of polycrystalline Mo2BC ceramic

Mechanical properties and microstructure of laminated Si3N4+SiCw/BN+Al2O3 ceramics densified by spark plasma sintering

Preparation of fine-grained MoAlB with preferable mechanical properties and oxidation resistance

Preparation and Mechanical Properties of Laminated Zirconium Diboride/molybdenum Composites Sintered by Spark Plasma Sintering

Influence of Y2O3 contents on sintering and mechanical properties of B4C-Al2O3 multiphase ceramic composites

Synthesis and properties of MoAlB composites reinforced with SiC particles

Microstructure and Wear Behaviors of Plasma-Sprayed MoAlB Ceramic Coating

Microstructure and mechanical properties of Mo0.9Cr0.1AlB solid solution

Structure and Properties of Aln Ceramics Prepared with Spark Plasma Sintering of Ultra-Fine Powders

Investigation on Mechanical Properties of AlON Ceramics Synthesized by Spark Plasma Sintering

High temperature tribological behavior of Mo–12Si–8.5B alloy reinforced with MoAlB ceramic

Effects of aluminum on micro-sized pore structure of porous MoAlB ceramics fabricated via reactive synthesis

Microstructure and mechanical properties of B4C based ceramics with Fe3Al as sintering aid by spark plasma sintering

Microstructure and mechanical properties of spark plasma sintered SiC–B4C gradient ceramics with Al additive

On the Tensile Strength of Spark Plasma Sintered AlMgB14 Ceramics