Abstract:To enhance the fracture toughness of B4C ceramics, B4C/TiB2 ceramics with excellent performance were prepared by using TiO2 as the addition item and using spark plasma sintering to introduce TiB2 based on in situ reaction, which was compared with ceramics directly introduced with TiB2, the impacts of TiO2 content, temperature and holding time on B4C/TiB2 ceramics were studied, and the toughening mechanism of B4C/TiB2 ceramics in situ reaction was discussed. The results showed that compared with the ceramics directly introduced with TiB2, B4C/TiB2 ceramics with reinforcement phase TiB2 introduced through in‐situ reaction were easier to obtain higher relative density and better properties. Due to the existence of a discharge effect and the application of pulse current, B4C/TiB2 ceramics with excellent comprehensive properties can be prepared at lower temperatures and short time. When 15 vol% TiO2 was added, the temperature was 1750°C and the holding time was 10 min, the comprehensive properties were better, and their relative density, Vickers hardness, flexural strength, and fracture toughness were 98.5%, 27.72 GPa, 474 MPa, and 5.08 MPa·m1/2, respectively. Toughening mechanisms such as crack deflection, crack branching, and crack bridging improved the fracture toughness.

Ultra-toughened Al2O3–TiC–Co ceramic

The Influence of Powder Characteristics on Mechanical Properties of Al2O3–TiC–Co Ceramic Materials Prepared by Co‐coated Al2O3/TiC Powders

Advanced ceramic and its wear resistance

Preparation of Ultra-Fine ATC Ceramics and Analysis of Its Dry-Sliding Wear Behavior

Research On Wear Behavior Of Atc Cermet Material

Mechanical Properties and Microstructure of Al<sub>2</sub>O<sub>3</sub>-Ti<sub>3</sub>SiC<sub>2</sub> Ceramic Composites

Tough and wear-resistant carbon fiber reinforced TiC-based composite prepared by alloyed melt infiltration at low temperatures

Fabrication and properties of Ti3AlC2-based ceramics by two-step method

Preparation and properties of Al2O3/Al-2(1-0.2)Mg0.2Ti(1+0.2)O5 matrix ceramic composite

Novel TiC-based ceramic with enhanced mechanical properties by reaction hot-pressing at low temperature

Fabrication and Properties of Ti<sub>3</sub>AlC<sub>2</sub>-Based Ceramics by Two-Step Method

Low-temperature densification of high-entropy (Ti,Zr,Nb,Ta,Mo)C—Co composites with high hardness and high toughness

Preparation of Al2O3/Ti3SiC2 multilayer materials by in-situ synthesis

Microstructure and Toughening Mechanisms of Al2O3/(W, Ti)C/graphene Composite Ceramic Tool Material

Fabrication of Al2O3–Ti3SiC2 Composites and Mechanical Properties Evaluation

Toughening mechanism of B4C/TiB2 ceramic materials by in situ reaction via spark plasma sintering

Preparation, microstructure and mechanical properties of MoAlB-0.15% Si ceramics with superior strength and toughness

Integrated preparation of B4C–TiB2 multilayer graded ceramics with high hardness and high toughness

Study on the mechanical properties and microstructure of Al2O3/nano-SiC multiphase ceramics

In-situ TiC/Ti composites based on Ti 2 AlC–Ti system: Reaction process, microstructure, and mechanical properties

Preparation and characteristics of Ti3AlC2 -Al3Ti/Al composite materials synthesized from pure Al and Ti3AlC2 powders