Abstract:Bismuth ferric oxide nanopowders were prepared through combustion method. Pure phase and well-crystallized BiFeO3 can be obtained by controlling the combustion process, fuel type and fuel-to-oxidant ratio. The evolutions of phase constitution and structural characteristics of the as-resulted nanopowders were investigated by X-ray diffraction, scanning electron microscope, and simultaneous thermogravimetric analysis. The results revealed that both the type and amount of fuel have to be carefully considered because they play an important role in total reaction characteristics. Among all tested fuels, L-alpha-alanine and glycine are the suitable fuels for BiFeO3 synthesis. For alpha-alanine, the optimal fuel-to-oxidant ratio is 0.22, which results in a suitable flame temperature for BiFeO3 formation. Still, too little fuel would result in only amorphous phase powders due to the low flame temperature and too much fuel would lead to transformation of the BiFeO3 phase to impurities because of the high flame temperature involved. The resulting BiFeO3 nanopowders exhibited strong H2O2-activiting ability and weak magnetism. When BiFeO3 nanopowders were used as a heterogeneous Fenton-like catalyst to degrade rhodamine B (RhB), the apparent rate constant for RhB degradation in the presence of H2O2 at pH 5.0 was evaluated to be 0.048 min(-1). (C) 2011 Elsevier B.V. All rights reserved.

Combustion synthesis of zinc ferrite powders

Combustion synthesis of zinc ferrite powders in oxygen

Phase Transformation and the Mechanism of Combustion Synthesis of ZnFe2O4 Ferrite Powders

Combustion Synthesis of MnZnFe2O4 Ferrite Powder

Preparation and Magnetic Properties of Zn–Cu–Cr–Sm Ferrite Via a Rheological Phase Reaction Method

Influence of oxygen pressure on combustion synthesis of zinc ferrite powders

Combustion synthesis and characterization of NiCuZn ferrite powders

Influence of oxygen pressure on combustion synthesis of ZnFe2O4

Self-propagating High-temperature Synthesis of NiCuZn-ferrite Powder

Self-propagating High Temperature Synthesis of Ni0.35Zn0.65Fe2O4 Ferrite Powders

MOSSBAUER SPECTROSCOPY OF THE METASTABLE PHASES DURING COMBUSTION SYNTHESIS AND HEAT TREATMENT OF MFe2O4 FERRITES

X-ray Diffraction and Mössbauer Studies of Phase Transformation in Manganese Ferrite Prepared by Combustion Synthesis Method

Combustion synthesis of nanometer zinc oxide

Synthesis of nanometer Ni-Zn ferrite powders by sol-gel auto-combustion

Synthesis of nanocrystalline NiCuZn ferrite powders by sol–gel auto-combustion method

STUDY ON SYNTHESIS OF Ni0.35Zn0.65Fe2O4 FERRITE BY SHS METHOD

Synthesis Of Nicuzn Ferrite Nano-Sized Particles By Sol-Gel Auto-Combustion

Combustion Characteristics of Zirconium Particles Coated with Ferrite Nanoparticles

Self-propagating High Temperature Synthesis and Magnetic Properties of Ni 0.35 Zn 0.65 Fe 2 O 4 Powders

Synthesis and photoluminescence properties of ZnO powder by solution combustion method

Factors Controlling Pure-Phase Magnetic BiFeO3 Powders Synthesized by Solution Combustion Synthesis