Abstract:Ni-ferrite (NiFe2O4) powder was synthesized by a self-propagating high-temperature synthesis (SHS) process using Fe, Fe2O3 and various Ni-containing species (Ni-CSs) as reactants. The reactants were thoroughly mixed and pressed into a cylindrical compact. The compact was ignited by electrical heating under oxygen partial pressures varying between 0.02 and 1.5MPa. The effects of the type of Ni-containing species, the reactant composition, the oxygen pressure on the combustion temperature, and the product conversion were investigated. X-ray diffraction (XRD) analysis showed that oxygen pressure promoted product conversion. Among several Ni-containing species tested, Ni2O3 was found to give the highest conversion. The product conversion increased with increasing iron content and then decreased with further increase in iron content. Scanning electron microscope (SEM) observations showed that the product synthesized is mostly in the form of agglomerated fine particles with submicron size (0.1–0.5μm). Hysteresis behavior analysis showed that the product as synthesized possessed better soft magnetic properties when compared with commercial Ni-ferrite prepared by the solid reaction method.

STUDY ON SYNTHESIS OF Ni0.35Zn0.65Fe2O4 FERRITE BY SHS METHOD

Self-propagating High Temperature Synthesis of Ni0.35Zn0.65Fe2O4 Ferrite Powders

Preparation and Magnetic Properties of Zn–Cu–Cr–Sm Ferrite Via a Rheological Phase Reaction Method

Self-propagating High Temperature Synthesis and Magnetic Properties of Ni 0.35 Zn 0.65 Fe 2 O 4 Powders

Self-propagating High-temperature Synthesis of NiCuZn-ferrite Powder

Self-propagating High Temperature Synthesis of Ni<SUB>0.35</SUB>Zn<SUB>0.65</SUB>Fe<SUB>2</SUB>O<SUB>4</SUB> using Various Ni-containing Species

Study on preparing Ni-Zn ferrites by SHS method

A self-propagating high-temperature synthesis method for Ni-ferrite powder synthesis

Self-propagating high temperature synthesis of Ni-Zn ferrite powder

Synthesis of NiCuZn Ferrite Powders by SHS Method

Influences of NiCO 3 content on the microstructure and magnetic properties of Ni 0.5 Zn 0.5 Fe 2 O 4 powders prepared by SHS

Microwave Synthesis and Characterizations of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Ferrite Powder

Effect of Iron Content on Self-Propagating High Temperature Synthesis of Ni -Zn Ferrite Powders

Microwave Synthesis and Characterizations of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Ferrite Powder

Influences of Nico3 Content on the Microstructure and Magnetic Properties of Ni0.5zn0.5fe2o4 Powders Prepared by Shs

Combustion synthesis and characterization of NiCuZn ferrite powders

High-temperature Solid State Synthesis and Characterization in Magnetic and Transporting Properties of Zn_xFe_(3-x)O_4 Powder

Effects of SHS processing parameters on the structure of NiZn ferrite pre-sintered powders

Sintering Routine Studies of NiFe2O4 Prepared by Self-Propagating High-Temperature Synthesis

Characterization and Low-Temperature Sintering of Ni0.5Zn0.5Fe2O4 Nano-Powders Prepared by Refluxing Method

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

STUDY ON SYNTHESIS OF Ni0.35Zn0.65Fe2O4 FERRITE BY SHS METHOD

Self-propagating High Temperature Synthesis of Ni0.35Zn0.65Fe2O4 Ferrite Powders

Preparation and Magnetic Properties of Zn–Cu–Cr–Sm Ferrite Via a Rheological Phase Reaction Method

Self-propagating High Temperature Synthesis and Magnetic Properties of Ni 0.35 Zn 0.65 Fe 2 O 4 Powders

Self-propagating High-temperature Synthesis of NiCuZn-ferrite Powder

Self-propagating High Temperature Synthesis of Ni&lt;SUB&gt;0.35&lt;/SUB&gt;Zn&lt;SUB&gt;0.65&lt;/SUB&gt;Fe&lt;SUB&gt;2&lt;/SUB&gt;O&lt;SUB&gt;4&lt;/SUB&gt; using Various Ni-containing Species

Study on preparing Ni-Zn ferrites by SHS method

A self-propagating high-temperature synthesis method for Ni-ferrite powder synthesis

Self-propagating high temperature synthesis of Ni-Zn ferrite powder

Synthesis of NiCuZn Ferrite Powders by SHS Method

Influences of NiCO 3 content on the microstructure and magnetic properties of Ni 0.5 Zn 0.5 Fe 2 O 4 powders prepared by SHS

Microwave Synthesis and Characterizations of Ni&lt;sub&gt;0.5&lt;/sub&gt;Zn&lt;sub&gt;0.5&lt;/sub&gt;Fe&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;4&lt;/sub&gt; Ferrite Powder

Effect of Iron Content on Self-Propagating High Temperature Synthesis of Ni -Zn Ferrite Powders

Microwave Synthesis and Characterizations of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Ferrite Powder

Influences of Nico3 Content on the Microstructure and Magnetic Properties of Ni0.5zn0.5fe2o4 Powders Prepared by Shs

Combustion synthesis and characterization of NiCuZn ferrite powders

High-temperature Solid State Synthesis and Characterization in Magnetic and Transporting Properties of Zn_xFe_(3-x)O_4 Powder

Effects of SHS processing parameters on the structure of NiZn ferrite pre-sintered powders

Sintering Routine Studies of NiFe2O4 Prepared by Self-Propagating High-Temperature Synthesis

Characterization and Low-Temperature Sintering of Ni0.5Zn0.5Fe2O4 Nano-Powders Prepared by Refluxing Method

Effects on Direct Synthesis of Large Scale Mono-Disperse Ni0.5zn0.5fe2o4 Nanosized Particles

Self-propagating High Temperature Synthesis of Ni<SUB>0.35</SUB>Zn<SUB>0.65</SUB>Fe<SUB>2</SUB>O<SUB>4</SUB> using Various Ni-containing Species

Microwave Synthesis and Characterizations of Ni<sub>0.5</sub>Zn<sub>0.5</sub>Fe<sub>2</sub>O<sub>4</sub> Ferrite Powder