One zirconia-based ceramic coating strategy of combustion stabilization for fuel-rich flames in a small-scale burner
Fan Li,Haolin Yang,Yue Ye,Liqiao Jiang,Xiaojun Zeng,Daiqing Zhao,Xiaohan Wang
DOI: https://doi.org/10.1016/j.fuel.2021.122306
IF: 7.4
2022-02-01
Fuel
Abstract:From the perspective of the thermal/chemical performance management of a slot burner, three kinds of blended coatings with the low thermal conductivity and certain chemical activities, including 30wt.%Y2O3/ZrO2, 30wt.%MgO/ZrO2 and 30wt.%Al2O3/ZrO2, were prepared on stainless steel walls plated by atmospheric plasma spraying. The effects of coating material, wall temperature, and equivalence ratio on fuel-rich methane flame characteristics were investigated experimentally. The OH planar laser-induced fluorescence (OH-PLIF) technique was used to obtain OH intensity and flame anchoring location. The physical and chemical properties of different coatings before and after spraying were analyzed by a series of material and surface characterization techniques. Results show that compared with pure ZrO2 coating, the quenching distances of three ZrO2-based blended coatings with Y2O3, MgO, and Al2O3 decrease to some extent, resulting in the minimum quenching distance of Al2O3/ZrO2 coating, and the maximum one for Y2O3/ZrO2 coating. Meanwhile, the blended coating walls result in the higher flame anchoring location than that of pure ZrO2 in most cases, in which the coating of Y2O3/ZrO2 displays the highest location. The blended coatings have higher thermal conductivity, which is beneficial to balance part of the heat loss through the axial heat recirculation of wall structures, and thus expanding stability limits at low temperatures. In addition, partial lattice solid solutions are formed in mixture systems after the ultra-high-temperature thermal spraying, leading to more surface lattice oxygen and stronger chemical promotion. In , reasonable allocation of ZrO2-based ceramic components as coating wall is an effective alternative strategy to control flame stabilization in small-scale combustion devices.
energy & fuels,engineering, chemical