Abstract:From the perspective of the thermal/chemical performance management of a slot burner, three kinds of blended coatings with the low thermal conductivity and certain chemical activities, including 30wt.%Y2O3/ZrO2, 30wt.%MgO/ZrO2 and 30wt.%Al2O3/ZrO2, were prepared on stainless steel walls plated by atmospheric plasma spraying. The effects of coating material, wall temperature, and equivalence ratio on fuel-rich methane flame characteristics were investigated experimentally. The OH planar laser-induced fluorescence (OH-PLIF) technique was used to obtain OH intensity and flame anchoring location. The physical and chemical properties of different coatings before and after spraying were analyzed by a series of material and surface characterization techniques. Results show that compared with pure ZrO2 coating, the quenching distances of three ZrO2-based blended coatings with Y2O3, MgO, and Al2O3 decrease to some extent, resulting in the minimum quenching distance of Al2O3/ZrO2 coating, and the maximum one for Y2O3/ZrO2 coating. Meanwhile, the blended coating walls result in the higher flame anchoring location than that of pure ZrO2 in most cases, in which the coating of Y2O3/ZrO2 displays the highest location. The blended coatings have higher thermal conductivity, which is beneficial to balance part of the heat loss through the axial heat recirculation of wall structures, and thus expanding stability limits at low temperatures. In addition, partial lattice solid solutions are formed in mixture systems after the ultra-high-temperature thermal spraying, leading to more surface lattice oxygen and stronger chemical promotion. In , reasonable allocation of ZrO2-based ceramic components as coating wall is an effective alternative strategy to control flame stabilization in small-scale combustion devices.

Preparation and Flame Ablation Resistance of Al/Zn/Cu-Incorporated Yttria Partially Stabilized Zirconia Coating

Design and Characterization of Zirconium-Based Multilayer Coating for Carbon/carbon Composites Against Oxyacetylene Ablation

Phase transitions and microstructure evolutions of in-situ YSZ-ZrC composite coating under long-time plasma torch ablation

Oxidation and Ablation Properties of ZrB2-SiC Based Coating for Carbon/Carbon Composites by Supersonic Plasma Spraying

High-temperature Oxidation of Sprayed Alumina and Zirconium‑yttrium-Based Coatings on Zircaloy-4 in Air and Oxygen: Investigation on Microstructure Evolution and Phase Changes

Preparation and Characterization of Aluminide/zirconia Composite Coatings by a Three-Step Combined Process

Structure and Properties of Thermal Barrier Coating Prepared by Alumina Coated Zirconia Composite Powder

High temperature oxidation resistance of Y2O3 modified ZrB2-SiC coating for carbon/carbon composites

Ablation Behavior of Y2O3 Modified HfC-based Coatings for Carbon/carbon Composites above 2200 °C

One zirconia-based ceramic coating strategy of combustion stabilization for fuel-rich flames in a small-scale burner

Microstructure and properties of Al2O3-ZrO2-Y2O3 coatings during high temperature and thermal shock resistance

Microstructure, Thermal Conductivity and Thermal Cycling Behavior of Thermal Barrier Coatings Prepared by Plasma Spray Physical Vapor Deposition

Study on the Ablation Resistance of Plasma Sprayed La2(Zr0·7Ce0.3)2O7/YSZ and La1·9Ca0·1(Zr0·7Ce0.3)1.9Cr0·1O6.9/YSZ Thermal Protection Coatings

Microstructure and Ablation Behavior of W Coating Prepared by Atmospheric Plasma Spraying for Zr/Cu Infiltrated C/C Composites

Zirconia-based Abradable Coatings Fabricated on Single-Crystal Superalloy: Microstructure, Residual Stress and Mechanical Properties

Ablation Resistant Properties And Mechanism Of Zrc Coating Deposited By Plasma-Spraying

Effect of Y2O3 on the oxidation resistant of ZrSiO4/SiC coating prepared by supersonic plasma spraying technique for carbon/carbon composites

Ablation Behavior of ZrB 2 -Based Coating Prepared by Supersonic Plasma Spraying for SiC-Coated C/C Composites under Oxyacetylene Torch

Preparation and ablation properties of ZrC-SiC coating for carbon/carbon composites by solid phase infiltration

Thermal stability of nanostructured 13wt% Al2O3–8wt% Y2O3–ZrO2 thermal barrier coatings

Thermal Properties of Plasma-Sprayed Multilayer Al₂O₃/Yttria-Stabilized Zirconia Coating