Abstract:At present, most flame retardants, especially halogenated compounds, are banned because of concern for environmental and health issues. In prospect of developing more ecofriendly and effective flame retardants, an alternative solution to develop novel biobased and inorganic flame retardants is addressed. Herein, a nano flame retardant consisting of a lamellar α-zirconium phosphate (α-ZrP) nanosheet modified with chitosan (CH), phytic acid (PA), and a metal ion (Cu<sup>2+</sup>) with a core–multishell structure is fabricated in water solution via a green and facile self-assembly method and applied to enhance the fire retardant effect of poly(vinyl alcohol) (PVA). Thermogravimetric analysis (TGA) demonstrated that after the addition of α@, PVA composites maintained their well-performed ability of char formation. The limit oxygen index (LOI) of pure PVA increased from 18.4 to 29.8% for PVA/α@ and it reached UL-94 V-1 grade. In the microscale combustion calorimeter test (MCC), the peak heat release rate (pHRR) and the total heat release (THR) of PVA/α@ sharply decreased by 82.3 and 62.2% compared with pristine PVA. The results implied that α@ could endow PVA with superior fire retardant properties. Moreover, the research manifested the synergy between α-ZrP and @Cu and a double barrier flame retardant mechanism in a condensed phase. In the α@ flame retardant system, the inorganic α-ZrP nanosheet acted as an insulating core, and the @Cu constituted an intumescent shell, where the outer @Cu intumescent shell formed an expanded char layer serving as the first barrier to hinder heat and oxygen transfer, and then the inner α-ZrP core layer, as the second barrier, would prevent the further exchange of flammable gases and energy between the polymer and fire during combustion. As a result, this ecofriendly nano flame retardant with the core–multishell structure has a potential application value.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsanm.0c01531?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsanm.0c01531</a>.XRD patterns of α-ZrP, @Cu, and α@ (Figure S-1); DTG curves of α-ZrP, @Cu, and α@ (Figure S-2); the XRD patterns of char residues of PVA/α-ZrP, PVA/@Cu, and PVA/α@ composites after vertical flame measurement (Figure S-3); the Raman spectrum of the char residues of pure PVA (Figure S-4); TGA data of α-ZrP, @Cu, α@, PVA, and PVA composites in N<sub>2</sub> (Table S-1); MCC data of all samples (standard deviations of three measurements are given in brackets) (Table S-2); flame retardant performance and smoke density of PVA and PVA composites (standard deviations of three measurements are given in brackets) (Table S-3); and the tensile strength of PVA and its composites (standard deviations of three measurements are given in brackets) (Table S-4) (<a class="ext-link" href="/doi/suppl/10.1021/acsanm.0c01531/suppl_file/an0c01531_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Phenylboronic acid-decorated ZrP nanosheets for enhancing fire resistance, smoke suppression, and water/acid/alkali tolerance of intumescent coatings

Surface functionalization of zirconium phosphate via sol-gel chemistry for optimizing fire safety and mechanical property of epoxy/intumescent flame retardant composites

Suppression on heat and smoke diffusion by zirconium nitride (ZrN) in intumescent flame retardant epoxy coatings

Catalyzing carbonization function of α-ZrP based intumescent fire retardant polypropylene nanocomposites

Synergetic modification of graphitic carbon nitride by Zr-based metal-organic framework and tetraethoxysilane for improving fire performance in composite coatings

Pyrolysis kinetics of ZrP-containing aliphatic waterborne polyurethane-based intumescent coating for flame-retarding plywood

Benign design of intumescent fire protection coatings for steel structures containing biomass humic acid as carbon source

Combined Zr and Y Phosphate Coatings Reinforced with Chemically Anchored B2O3 for the Oxidation Inhibition of Carbon Fiber

Construction of Organic–inorganic Hybrid Nano-Coatings Containing Α-Zirconium Phosphate with High Efficiency for Reducing Fire Hazards of Flexible Polyurethane Foam

Flower-like Ni-Al/LDH synergistic polyaniline anchored to the carbon sphere surface to improve the fire performance of waterborne epoxy coatings

Preparation of Zeolitic Imidazolate Frameworks and Their Application as Flame Retardant and Smoke Suppression Agent for Rigid Polyurethane Foams

Growing metal–organic framework nanoparticles on short carbon fibers to improve flame retardancy, smoke suppression and mechanical properties of the flame retardant epoxy composites

Water-based intumescent fire resistance coating containing organic-modified glass fiber for steel structure

Synergistic effect of phytic acid and eggshell bio-fillers on the dual-phase fire-retardancy of intumescent coatings applied on cellulosic substrates

The preparation of ZIF-67 and its synergistic effect on fire performance of intumescent flame retardant polypropylene

Flame-retardant activity of ternary integrated modified boron nitride nanosheets to epoxy resin

Mineralized black phosphorus @ silica nanofiber multi-scale enhanced hydrogel coating for fire protection of polyurethane foams

Synthesis of zirconium aminotrimethylene phosphonate nanorods and their application in toughened and flame retarded epoxy composites

Diaminodiphenylmethane modified zirconium phosphate: A new strategy for trace addition to improve flame retardancy, smoke inhibition, and compatibility of epoxy resins

Flame protection capability of waterborne epoxy coatings enhanced by inorganic-organic phenyl zirconium phosphate anchored boron nitride

Green and Facile Fabrication of α-Zirconium Phosphate-Based Core–Multishell Nanoparticles for Enhancing Fire Retardant Performance of Poly(vinyl alcohol)