Abstract:ZnTiO3 powders were prepared by sol-gel method using ammonium hydroxide. The effects of calcination temperature (500â€“ 1000âˆ ̃ C). and the molar ratios ZnO/TiO2. The synthesis of a nano perovskite ZnTiO3 usually results in the formation of one or more of the compounds such as Zn2TiO4, and ZnTiO3 with other secondary impurity phases such as rutileTiO2 or ZnO. To obtain a phase-pure a nano perovskite ZnTiO3 at a low processing temperature is one of the challenges in materials chemistry., pure ZnTiO3 can not be synthesized under normal conditions, because it transforms into Zn2TiO4 and rutile. In the current study, the crystalline and phase transformation behaviors of sol-gel synthesized a nano perovskite ZnTiO3 has systematically been investigated with regard to various Zn:Ti precursor molar ratios. The ZnTiO3 phase can be detected by XRD in the powders calcined above 600 Â°C. The formation of ZnTiO3 is a slow reaction process, which leads to the development of large ZnTiO3 particles, with dimensions after calcination at 700 Â°C for 5 h in the range of 68â€“81 Nm. Calcination temperature increased considerably the crystallite size of the nano perovskite ZnTiO3 from 68 to 81 nm This treatment led also to the creation of holes in the matrix of calcinated solids which increased the mobility of charge carriers (electrons) leading to a significant decrease in the decrease in the optical energy gap reaching to (2.7 to 2 )e.v.

Formation and Transformation of Cubic ZnTiO3 Powders Prepared by Sol-gel Process

Formation and transformation of ZnTiO3 prepared by sol–gel process

Characterization of ZnTiO 3 powders prepared by sol-gel process

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Preparation and Characterization of Cubic Zinc Metatitanate Nano-Powders Via the Precipitation Process

Sol–gel Synthesis and Sintering of Nano-Size Li2TiO3 Powder

The Characterization and Preparation of Nano-Scale Fe Doping Tio2 by Sol-Gel Method (I) - the Crystallization and Thermal Decomposition Process of Fe Doping Tio2 Xerogel Powders Using Thermal Tg-Ir Spectrometry

Preparation of Zirconia Powders by Sol-gel Process

Synthesis of PZT Nano-crystalline Powder by Sol-gel Method and Structure Characterization

Solid-phase Synthesis and Characterization of ZnO-TiO 2 System

EFFECT OF PHASE TRANSFORMATION ON OPTICAL PROPERTIES OF ZNTIO3 CERAMIC POWDER PREPARED BY SOL-GEL METHOD

Synthesis of ZnTiO3 Ceramic Powders by Sol-Gel Method

Structure And Raman Spectroscopy Of Nanocrystalline Tio2 Powder Derived By Sol-Gel Process

Preparation of CuO-TiO2 nanocrystalline powders by the sol-gel method

Materials science communication synthesis of pzt nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Synthesis of PZT nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Ultrafine Powders by a Sol-Gel Combined with Combustion Process

Crystallization Kinetics and Dielectric Properties in Sol-Gel Derived (Pb,la)(zr,sn,ti)o-3 Ceramics

Preparation of tetragonal CaO-ZrO2 nano-powder by chemical coprecipitation method

Study on synthesis of PZT nano-crystalline powders by the modified sol-gel method and the crystalline transition process

Synthesis of TiO2 material by Sol-Gel method