Abstract:Nanocrystalline lead zirconate titanate (PZT) powders with composition at the morphotropic phase boundary (MPB) were synthesized by a simple aqueous based sot-gel method, using lead nitrate, zirconium nitrate and tetrabutyl titanate as the starting materials. The sot could be easily transformed into gel, firstly heated at 120 degrees C for 10h, then at 180 degrees C for 24h. The thermal decomposition process of the gel was investigated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. The effect of citrate addition amount on the calcining temperature was discussed. The results reveal that pure perovskite phase PZT powders can be obtained at a calcining temperature as low as 600 degrees C. The average grain size of the powders was determined by transmission electron microscope and X-ray diffraction. The influences of calcining temperature and the pH value of the solution on the grain size were investigated. The sintering temperature and electrical properties of the ceramics derived by nano-powders were compared with those prepared by the conventional ceramic processing. The result shows that using the nanopowder, the sintering temperature could be reduced by about 100 degrees C and the ferroelectric properties were enhanced.

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Preparation of PZT Thick Film by a High Speed Sol-gel Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Hydrothermal synthesis and characterization of nanocrystalline PZT powders

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Exploration of single-crystal like electrospun Pb(Zr_(0.52)Ti_(0.48))O_3 nanofibers synthesis via electrospinning

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Fabrication and Characterization of Size-Controlled Single-Crystal-like PZT Nanofibers by Sol–gel Based Electrospinning

Synthesis of PbZrO3 Powder by a COprecipitation Method

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Sonochemical preparation of net-lead zirconate titanate (PZT)

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Synthesis of piezoelectric nanocrystalline PZT powder by stearic acid gel method

Growth and ferroelectric properties of sol-gel derived Pb(Zr,Ti)O3 using inorganic zirconium precursor

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Preparation of PZT Thick Film by a High Speed Sol-gel Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Hydrothermal synthesis and characterization of nanocrystalline PZT powders

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Exploration of single-crystal like electrospun Pb(Zr_(0.52)Ti_(0.48))O_3 nanofibers synthesis via electrospinning

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr&lt;sub&gt;0.52&lt;/sub&gt;Ti&lt;sub&gt;0.48&lt;/sub&gt;)O&lt;sub&gt;3&lt;/sub&gt; (PZT) Powders by a Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Fabrication and Characterization of Size-Controlled Single-Crystal-like PZT Nanofibers by Sol–gel Based Electrospinning

Synthesis of PbZrO3 Powder by a COprecipitation Method

Facile Preparation and Performance of Novel High-Tc Xbi(ni1/2ti1/2)o3-(1-x)pb(zr1/2ti1/2)o3 Piezoceramics

Preparation and Properties of CaTiO_3:Zn Nanoparticles Based on Sol-Gel Method

Sonochemical preparation of net-lead zirconate titanate (PZT)

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Poly(vinyl Pyrrolidone)-Assisted Hydrothermal Synthesis of Pb(Zr0.52Ti0.48)O3 Nanocrystals

Synthesis of piezoelectric nanocrystalline PZT powder by stearic acid gel method

Growth and ferroelectric properties of sol-gel derived Pb(Zr,Ti)O3 using inorganic zirconium precursor

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method