Abstract:Nanocrystalline lead zirconate titanate (PZT) powders with composition at the morphotropic phase boundary (MPB) were synthesized by a simple aqueous based sot-gel method, using lead nitrate, zirconium nitrate and tetrabutyl titanate as the starting materials. The sot could be easily transformed into gel, firstly heated at 120 degrees C for 10h, then at 180 degrees C for 24h. The thermal decomposition process of the gel was investigated by thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) techniques. The effect of citrate addition amount on the calcining temperature was discussed. The results reveal that pure perovskite phase PZT powders can be obtained at a calcining temperature as low as 600 degrees C. The average grain size of the powders was determined by transmission electron microscope and X-ray diffraction. The influences of calcining temperature and the pH value of the solution on the grain size were investigated. The sintering temperature and electrical properties of the ceramics derived by nano-powders were compared with those prepared by the conventional ceramic processing. The result shows that using the nanopowder, the sintering temperature could be reduced by about 100 degrees C and the ferroelectric properties were enhanced.

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Synthesis of PbZrO3 Powder by a COprecipitation Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Pb(Zr 0.95 Ti 0.05 )O 3 Powders Prepared by Aqueous Pechini Method Using One-Step Pyrolysis Process: Characterization and Porous Ceramics

Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Ultrafine Powders by a Sol-Gel Combined with Combustion Process

High-pressure Synthesis of PbZr0.52Ti0.48O3

Synthesis of PZT nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

High-pressure Synthesis of PbZr_(0.52)Ti_(0.48)O_3

Low temperature synthesis of lead zirconate titanate powder by hydroxide co-precipitation

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Pb(Zr0.95Ti0.05)O3 Powders Synthesized by PEG Modified Pechini Method: Characterization and Sintering Behavior

Hydrothermal synthesis and characterization of nanocrystalline PZT powders

Hydrothermal synthesis and characterization of crystalline ZrxTi1−xO4 (x = 0.35–0.65) powders as a precursor for the preparation of PbZrxTi1−xO3

Preparation of PZN–PT–BT Ferroelectric Ceramics by Modified Two-Step Method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Synthesis of perovskite Pb(Zr0.52Ti0.48)O3 (PZT) powders by a modified coprecipitation method

Synthesis of Perovskite Pb(Zr&lt;sub&gt;0.52&lt;/sub&gt;Ti&lt;sub&gt;0.48&lt;/sub&gt;)O&lt;sub&gt;3&lt;/sub&gt; (PZT) Powders by a Modified Coprecipitation Method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method

Synthesis Of Perovskite Pb(Zr0.52ti0.48)O-3 (Pzt) Powders By A Modified Coprecipitation Method

Synthesis of Pb(Zr0.52Ti0.48)O3(PZT) Powder by A Partial Lead Oxalate Coprecipitation Method

Synthesis and Thermal Stability of Perovskite PbZr0.52Ti0.48O3 (PZT) Powders Via Precipitation Routes

Synthesis of PbZrO3 Powder by a COprecipitation Method

Pva Assisted Synthesis of Nanosized Perovskite Pzt Powder by A Two-Stage Precipitation Route

Hydrothermal Synthesis of Lead Zirconate Titanate Nearly Free-Standing Nanoparticles in the Size Regime of about 4 Nm

Pb(Zr 0.95 Ti 0.05 )O 3 Powders Prepared by Aqueous Pechini Method Using One-Step Pyrolysis Process: Characterization and Porous Ceramics

Preparation and Characterization of Pb(Zr0.52Ti0.48)O3 Ultrafine Powders by a Sol-Gel Combined with Combustion Process

High-pressure Synthesis of PbZr0.52Ti0.48O3

Synthesis of PZT nanocrystalline powder by a modified sol-gel process using zirconium oxynitrate as zirconium source

High-pressure Synthesis of PbZr_(0.52)Ti_(0.48)O_3

Low temperature synthesis of lead zirconate titanate powder by hydroxide co-precipitation

Synthesis and characterization of nanocrystalline PZT powders by a simple sol-gel method

Pb(Zr0.95Ti0.05)O3 Powders Synthesized by PEG Modified Pechini Method: Characterization and Sintering Behavior

Hydrothermal synthesis and characterization of nanocrystalline PZT powders

Hydrothermal synthesis and characterization of crystalline ZrxTi1−xO4 (x = 0.35–0.65) powders as a precursor for the preparation of PbZrxTi1−xO3

Preparation of PZN–PT–BT Ferroelectric Ceramics by Modified Two-Step Method

Processing and characterization of lead zirconate titanate nanopowders by a simple water-based sol-gel method

Synthesis of Perovskite Pb(Zr<sub>0.52</sub>Ti<sub>0.48</sub>)O<sub>3</sub> (PZT) Powders by a Modified Coprecipitation Method