Abstract:In this work, a dual-sided buffer template, which allows the deposition of YB2Cu3O7-delta (YBCO) coated conductors on both sides, has been proposed and investigated. Theoretically, in contrast to traditional YBCO structure on one side, the performance of critical current in YBCO films has been improved by two times. In this buffer structure, the dual-sided Y2O3 films were grown on a flexible metal template by a home-made reel-to-reel dynamic direct current sputtering system and the film growth parameters were systematically investigated. The microstructure were characterized by in situ reflection high-energy electron diffraction monitoring in real time during the deposition stage. X-ray diffraction, and atomic force microscopy were used to detect the biaxial texture and surface morphology, respectively. What's more, by the application of stopping and range of ions in matter software, it helped us to understand the influence of deposition parameter to the growth rate of Y2O3 films. Finally, the biaxial texture of dual-sided Y2O3 film yielded out-of-plane texture of Delta omega = 4.2 degrees and in-plane texture of Delta Phi = 5.2 degrees for one side, as well as Delta omega = 5 degrees and Delta Phi = 5.3 degrees for the second side. Subsequently, the dual sided YBCO superconducting films were coated on the above Y2O3 buffer layer by low-cost metal-organic chemical vapor deposition method with critical current of 30 A/cm and 60 A/cm for each side.

Preparation of SrTiO_3 buffer layers on Ni-W tapes by MOD method

Preparation of NiO Buffer Layer by Direct Oxygenation of Ni Tape

A Simple One-Step Heat Treatment Process for Preparing Biaxially Textured Buffer Layers on Rolled Ni Tape for High Tc Coated Conductors’ Application

Preparation of SrTiO3 Buffer Layers on BaxSr1−xTiO3 Seed Layers Buffered Ni Tapes by Chemical Solution Deposition

Preparation and Crystalline Qualities of SrTiO3 and CeO2 Buffer Layers Fabricated on Ni Substrates Via a Sol–gel Method for YBCO Coated Conductors

Advance in Long-Length REBCO Coated Conductors Prepared by Reel-to-Reel Metalorganic Solution and Ion-Beam-Assisted Deposition

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors

Effect of seed layers on the preparation of SrTiO3 buffer layers on Ni tapes via sol–gel method

A Method to Fabricate Biaxially Textured MgO Buffer Layer for HTS Coated Conductor

Metalorganic Deposition of YBCO Films for Second-Generation High-Temperature Superconductor Wires

Conductive Buffer Layers and Overlayers for the Thermal Stability of Coated Conductors

Production of Long YBCO-coated Conductors using the TFA-MOD Method

Mechanical Writing of N-Type Conductive Layers on the SrTiO3 Surface in Nanoscale

RECENT PROGRESS IN COATED CONDUCTORS BY IBAD METHOD AND THE PREPARATION OF LONG YSZ/HASTELLOY SUBSTRATES

Analysis of Technical Routes to Fabricate HTS Coated Conductors

Effective surface modification by chemical solution deposition for flexible metal substrates

Chemical Solution Deposition of Lamno3-Based Films for Coated Conductors

Epitaxial growth of Gd 2 Zr 2 O 7 /Y 2 O 3 buffer layers for YBa 2 Cu 3 O 7− δ coated conductors

Growth of SrTiO3 Thin Films on BaxSr1−xTiO3 (x=0.3, 0.5) Seed Layers on Ni (200) Substrates Using Spin Coating Technique

Preparation of A Monodispersed Suspension of Barium Titanate Nanoparticles and Electrophoretic Deposition of Thin Films

Epitaxial Growth and Characterization of Dual-Sided Y2O3 Buffer Layer for Superconducting Coated Conductors