Abstract:Ion beam-assisted deposition (IBAD) has been proposed as a promising texturing technology that uses the film epitaxy method to obtain biaxial texture on a non-textured metal or compound substrate. Magnesium oxide (MgO) is the most well explored texturing material. In order to obtain the optimal biaxial texture, the actual thickness of the IBAD-MgO film must be controlled within 12nm. Due to the bombardment of ion beams, IBAD-MgO has large lattice deformation, poor texture, and many defects in the films. In this work, the solution deposition planarization (SDP) method was used to deposit oxide amorphous Y2O3 films on the surface of Hastelloy C276 tapes instead of the electrochemical polishing, sputtering-Al2O3 and sputtering-Y2O3 in the commercialized buffer layer. An additional homogeneous epitaxy MgO (epi-MgO) layer, which was used to improve the biaxial texture in the IBAD-MgO layer, was deposited on the IBAD-MgO layer by electron-beam evaporation. The effects of growth temperature, film thickness, deposition rate, and oxygen pressure on the texture and morphology of the epi-MgO film were systematically studied. The best full width at half maximum (FWHM) values were 2.2° for the out-of-plane texture and 4.8° for the in-plane texture for epi-MgO films, respectively. Subsequently, the LaMnO3 cap layer and YBa2Cu3O7-x (YBCO) functional layer were deposited on the epi-MgO layer to test the quality of the MgO layer. Finally, the critical current density of the YBCO films was 6 MA/cm2 (77 K, 500 nm, self-field), indicating that this research provides a high-quality MgO substrate for the YBCO layer.

A Simple One-Step Heat Treatment Process for Preparing Biaxially Textured Buffer Layers on Rolled Ni Tape for High Tc Coated Conductors’ Application

Development and Evolution of Biaxial Texture of Rolled Nickel Tapes by Ion Beam Bombardment for High Tc Coated Conductors

Preparation and Crystalline Qualities of SrTiO3 and CeO2 Buffer Layers Fabricated on Ni Substrates Via a Sol–gel Method for YBCO Coated Conductors

Ion-Beam Bombardment Induced Texture in Nickel Substrates for Coated High-T-C Superconductors

Preparation and Texture Evolution of Epitaxially Grown CeO2 Buffer Layers Using Inorganic Salts As Starting Materials for YBCO Coated Conductors

Preparation and Evaluation of Cube Texture Ni Substrate for Ybco-Coated Superconductor

Preparation of SrTiO3 Buffer Layers on BaxSr1−xTiO3 Seed Layers Buffered Ni Tapes by Chemical Solution Deposition

Preparation of NiO Buffer Layer by Direct Oxygenation of Ni Tape

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors

A Method to Fabricate Biaxially Textured MgO Buffer Layer for HTS Coated Conductor

In Situ EBSD Study of Stable Cube Texture in an Advanced Composite Substrate Used in YBCO-Coated Conductors

Preparation of MgO Self-Epitaxial Films for YBCO High-Temperature Coated Conductors

RECENT PROGRESS IN COATED CONDUCTORS BY IBAD METHOD AND THE PREPARATION OF LONG YSZ/HASTELLOY SUBSTRATES

Conductive Buffer Layers and Overlayers for the Thermal Stability of Coated Conductors

Epitaxial Growth and Characterization of Dual-Sided Y2O3 Buffer Layer for Superconducting Coated Conductors

A New Direct Process to Prepare YBa2Cu3O7- films on Biaxially Textured Ag{110}<211>

Low-cost YBCO coated conductor technology

Texture Development of Dip-Coated Bi-2223 Thick Films on Ag Substrate

Epitaxial growth of Gd 2 Zr 2 O 7 /Y 2 O 3 buffer layers for YBa 2 Cu 3 O 7− δ coated conductors

Analysis of Technical Routes to Fabricate HTS Coated Conductors

Biaxially Textured Ceo2 Seed Layers and Thin Films on Ni Substrates by Chemical Solution Deposition Using Inorganic Cerium Nitrate As A Precursor