Abstract:Thick superconducting multilayer architectures consisting of alternate superconducting and superconducting layers DyBCO/YBCO and alternate superconducting and insulating layers YBCO/CuO(Y2O3) are developed on buffered Hastelloy tapes using a metal organic deposition process. It is revealed that multilayer intermittent structures for superconducting layers are effective to avoid the presence of microcracks that occur with increasing thickness, which are frequently observed in monolayer films ofREBa(2)Cu(3)O(7-delta) (REBCO, RE= Y, Gd, or other rare earth elements). This paper shows that the thicknesses of DyBCO/YBCO multilayer films can reach 2.8 mu m with a homogeneous, dense and crack-free surface morphology. The out-plane FWHM of the YBCO (005) peaks and the critical current value reach 1.1 degrees and 365 A/cm (77 K, self-field) for such a thick film consisting of Dy-BCO/YBCO multilayers. It is also revealed that the introduction of a CuO layer is effective to avoid the presence of a-axis grains and voids of the YBCO films, which are frequently observed in multilayer films. Note that the introduction of CuO shows little negative influence on the texture of multilayer structure, especially for the bottom CuO. However, the in-plane texture deteriorates seriously for Y2O3/YBCO/YBCO multilayer film. The critical current density of YBCO films with middle CuO and bottom CuO are 2.0 MA/cm(2) and 2.5 MA/cm(2) (77 K, self-field), respectively. The microstructure optimization including the texture, uniformity, crack, defect, and porosity in the multilayered films is probably the reason for the enhancement of superconducting performance.

Conductive Buffer Layers and Overlayers for the Thermal Stability of Coated Conductors

A Novel All-Conductive Architecture on Biaxially Textured Metal Substrates for YBCO Coated Conductors

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors

Artificial Multilayers of REBaCuO/YBaCuO and YBCO/CuO(Y2O3) for High-Performance Long Tapes of Coated Conductors Derived by Metal Organic Solution Deposition

Influence of Buffer Layer Surface Morphology on YBCO Critical Current Density Deposited on NiW Tapes

Crystalline Alignment and In-plane Texture Improvement of Buffer Layers Deposited on NiW Tapes

Low-cost YBCO coated conductor technology

Uniformity of Long-Length Double-Sided CeO_2 Buffer Layer for YBa_2Cu_3O_(7-δ) Coated Conductors

Preparation of a Series of New Buffer Materials for Coated Conductors

Fast Growth Processes of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Single Cerium Zirconate Buffer Layer on Biaxially Textured Metal Substrates for High Performance Coated Conductors

A Simple One-Step Heat Treatment Process for Preparing Biaxially Textured Buffer Layers on Rolled Ni Tape for High Tc Coated Conductors’ Application

Reel-To-Reel Deposition of Epitaxial Double-Sided Y2o3 Buffer Layers for Coated Conductors

Fabrication and Characterization of Ni-clad Bi-2223/Ag Superconducting Tapes

The Manufacturing of an Electroplated Ni Layer on Textured Cu Substrate for Cu-Based Hts Coated Conductors

Rapid Deposition of Buffer Layers for YBCO Coated Conductors on Biaxially-Textured Ni Tapes

Synergic realization of electrical insulation and mechanical strength in liquid nitrogen for high-temperature superconducting tapes with ultra-thin acrylic resin coating

Thickness Effect of Gd2Zr2O7 Buffer Layer on Performance of YBa2Cu3O7−δ Coated Conductors

Improved Textured La2Zr2O7 Buffer Layers on Bi-Axially Textured Ni–W Substrates Using CeO2 Seed Layers for YBa2Cu3O7−x Coated Conductors

Characterisation of YSZ Layers Deposited on Y2O3 Buffered Textured Tapes for Coated Conductors

Metal Organic Deposition of Lanthanum Zirconate Buffer Layer on Biaxially Textured Ni-5%W Substrate