Abstract:Four years of the current five-year national project since 2003 for development of coated conductors using Y-system superconductors have passed and lots of remarkable results have been achieved. In this paper, the current status and the future prospect of this project are reviewed. The current national project comprises several groups of national laboratories, universities and private companies. The group of high performance tape development, consisting of Fujikura and SRL-NCCC, has worked on the tape by PLD-REBCO superconducting tapes on the PLD-CeO2/IBAD-GZO buffered substrates. The high product of Ic and L equal to 112,166Am was achieved in the 368m-304.8A GdBCO tape whose Ic value is mostly above 350A/cm-w. The performance under the magnetic fields was also improved up to 42A at 3T in a GdBCO short film with doping of ZrO2. About 61m long GdBCO tape with ZrO2 doping showed a high Ic value of 220A at self field and 30A at 3T. On the other hand, the other group focusing on the low production cost has worked on processes of TFA-MOD and MOCVD, etc. The extremely high Ic value of 735A/cm-w was attained in the TFA-MOD films on PLD-CeO2/IBAD-GZO/Hastelloy C276 substrate by means of using the effect of Ba-poor nominal composition. In the efforts for long tape production, 200m long tapes with high Ic values of 200A/cm-w and 205A/cm-w were obtained by MOD-YBCO/PLD-CeO2/IBAD-GZO/Hastelloy C276 and PLD-HoBCO on buffered NiW substrate, respectively. The Ic×L value of the MOD-derived tape was 40,000Am, which is the highest value in the world by the MOD process. Based on the above achievements on the coated conductor process development, two new additional goals were set in the project. One is the development for the extremely low cost tape and another is the development of the basic technologies for making the electric power devices including cables, transformers, motors, current-limiters and cryocoolers. Some of the new themes already revealed the marvellous results such as 15kW motor, low AC loss coils, low AC loss cables, etc.

Production of Long YBCO-coated Conductors using the TFA-MOD Method

Present Status & Future Prospects of Coated Conductor Development in Japan

Advance in Long-Length REBCO Coated Conductors Prepared by Reel-to-Reel Metalorganic Solution and Ion-Beam-Assisted Deposition

RECENT PROGRESS IN COATED CONDUCTORS BY IBAD METHOD AND THE PREPARATION OF LONG YSZ/HASTELLOY SUBSTRATES

Cost-effective and High-Rate Process for Solution-Drived YBa<inf>2</inf>Cu<inf>3</inf>O<inf>7-&#x03B4;</inf> Coated Conductors

Present status and future prospect of coated conductor development and its application in Japan

Metalorganic Deposition of YBCO Films for Second-Generation High-Temperature Superconductor Wires

Current status and future prospects of Japanese national project on coated conductor development and its applications

Low-cost YBCO coated conductor technology

Epitaxial Superconductors on Rolling-Assisted Biaxially-Textured Substrates (rabits): a Route Towards High Critical Current Density Wire

Fabrication and Analysis of Tri-layer YBa 2 Cu 3 O 7− δ Thick Films by Low-Fluorine MOD Method

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Fabrication and Analysis of Tri-layer YBaCu Thick Films by Low-Fluorine MOD Method

Progress and future prospects of research and development on coated conductors in japan

Mod-derived YBa2Cu3O7-δ thin filmsusing a fast pyrolysis process

Fabrication And Analysis Of Tri-Layer Yba2cu3 O (7-Delta) Thick Films By Low-Fluorine Mod Method

MOD multi-layer YBCO films on single-crystal substrate

Analysis of Technical Routes to Fabricate HTS Coated Conductors

Precursor evolution and growth mechanism of BTO/YBCO films by TFA—MOD process

MOD-Derived YBa<sub>2</sub>Cu<sub>3</sub>O<sub>7-δ</sub> Thin Films using a Fast Pyrolysis Process

Crucial role of oxygen-deficient LaMnO3-delta cap buffer layer in enhancement of current carrying capability of MOD-YBCO coated conductors