Abstract:Fusion reactors are limited by the magnetic field available to confine their plasma. The commercial fusion industry uses the larger magnetic field and higher operating temperature of the cuprate superconductor $\mathbf{YBa_{2}Cu_{3}O_{7-\delta}}$ (YBCO) in order to confine their plasma into a dense volume. A superconductor is a macroscopic quantum state that is protected from the metallic (resistive) state by an energy gap. Unfortunately, YBCO has an anisotropic gap, known as D-wave because it has the shape of a $\mathbf{d_{x^2-y^2}}$ chemical orbital. This D-wave gap means that poly-crystalline wire cannot be made because a few degree misalignment between grains in the wire leads to a drastic loss in its supercurrent carrying ability, and thereby its magnetic field limit. The superconductor industry has responded by growing nearly-single-crystal superconducting YBCO films on carefully prepared substrate tapes kilometers in length. Heroic development programs have made such tapes commercially available, but they are very expensive and delicate. MRI magnet superconductors, such as $\mathbf{NbTi}$ and $\mathbf{Nb_{3}Sn}$, are formed into poly-crystalline wires because they have an isotropic gap in the shape of an s chemical orbital (called S-wave) that makes them insensitive to grain misalignment. However, these materials are limited to lower magnetic fields and liquid-He temperatures. Here, we modified YBCO by doping the Y site with Ca and Ce atoms to form $\mathbf{(Y_{1-x-y}Ca_{x}Ce_{y})Ba_{2}Cu_{3}O_{7-\delta}}$, and show evidence that it changes to an S-wave gap. Its superconducting transition temperature, $\mathbf{T_c}$, of $\mathbf{\sim 70K}$, while lower than that of D-wave YBCO at $\mathbf{\sim 90K}$, is easily maintained using common, economic cryogenic equipment.

Epitaxial Superconductors on Rolling-Assisted Biaxially-Textured Substrates (rabits): a Route Towards High Critical Current Density Wire

Development and Evolution of Biaxial Texture of Rolled Nickel Tapes by Ion Beam Bombardment for High Tc Coated Conductors

Low-cost YBCO coated conductor technology

Production of Long YBCO-coated Conductors using the TFA-MOD Method

Melt Growth of YBa 2 Cu 3 O 7-δ by Using BaCu 2 O 2 and Y 2 BaCuO 5 in Ag-Sheath

Exfoliated YBCO filaments for second-generation superconducting cable

Thick $\Hbox{yba}_{2}\hbox{cu}_{3}\hbox{o}_{7-\Delta}$ Superconducting Films by Low-Fluorine Metallorganic Solution Deposition

Ion-Beam Bombardment Induced Texture in Nickel Substrates for Coated High-T-C Superconductors

Biaxial Alignment of High-Tc Superconductor Polycrystals(Iii) - Demonstration in A Bi-2212(Yb) Thick-Film

Artificial Multilayers of REBaCuO/YBaCuO and YBCO/CuO(Y2O3) for High-Performance Long Tapes of Coated Conductors Derived by Metal Organic Solution Deposition

Metalorganic Deposition of YBCO Films for Second-Generation High-Temperature Superconductor Wires

Advance in Long-Length REBCO Coated Conductors Prepared by Reel-to-Reel Metalorganic Solution and Ion-Beam-Assisted Deposition

Development of persistent joints for superconducting Bi-2212 coils

High Transport Current Superconductivity in Powder-in-tube Ba0.6K0.4Fe2As2 Tapes at 27T

A practical processing method for fabrication of single-domain YBCO superconductors using large-sized GdBCO seed crystals

Groove-rolling as an alternative process to fabricate Bi-2212 wires for practical applications

A new RE + 011 TSIG method for the fabrication of high quality and large size single domain YBCO bulk superconductors

Epitaxial Growth and Characterization of Dual-Sided Y2O3 Buffer Layer for Superconducting Coated Conductors

Epitaxial growth and high critical current density of BHO-doped YBCO/STO composite films

Analysis of Technical Routes to Fabricate HTS Coated Conductors

Potential Major Improvement in Superconductors for High-Field Magnets