Abstract:Due to its high bonding energy and low self-diffusion coefficient, silicon nitride (Si3N4) ceramics cannot form a dense structure with prolonged high-temperature insulation or by raising the sintering temperature. To improve the density of the sintered Si3N4 ceramics, additives are added to promote the rearrangement–dissolution–precipitation process of the crystal grains. However, the liquid phase formation temperature of different sintering aid chemical compositions varies, making it challenging to isolate the mechanism and the effect of liquid phase formation temperatures on sintering. Hence, we developed three sintering aids, namely Y2O3-Al2O3 (YA), Y2Si2O7 (Y2S), and Y2Si2O7-Al6Si2O13 (Y2SM), with homologous elements and different liquid phase formation temperatures. These sintering aids can form a liquid phase with SiO2 on the surface of Si3N4 at varying temperatures. We analyzed the sintered Si3N4 ceramic's density, volume shrinkage rate, and microstructure to verify the YA's lower liquid phase formation temperature effect, providing more rearrangement time and increasing sintering density. Conversely, sintering aids with too low liquid phase formation temperatures are more prone to volatilize during high-temperature sintering stages, thereby reducing sintering density. This research found that different liquid phase formation temperatures do not affect the α→β phase transition temperature of Si3N4 ceramics. We also evaluated the Y2S sintering aid contents' effect on Si3N4 ceramics sintering. The results revealed that aiding sintering with too little Y2S content is insufficient for liquid phase production, and hence does not improve sintering density. Conversely, excessive liquid phase can improve density and refine grain size but increases weight loss rate during sintering due to volatilization.

The effect of additives on sintering behavior and strength retention in silicon nitride with RE-disilicate

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Influences of Rare-Earth Oxide Additives on the Formation and Properties of Porous Si2N2O Ceramic

Effect of Rare Earth Additives on Properties of Silicon Nitride Ceramics

Effects of MgO-RE2O3 and SiO2-RE2O3 (RE = La, Nd, Gd, Ho and Lu) Complex Sintering Additives on the Phase Composition, Microstructure and Mechanical Properties of Dual-Phase Si3N4 Ceramics

Effect Of Rare-Earth Additives On Thermal Conductivity, Mechanical And Electrical Properties Of Silicon Nitride Ceramics

Effects of Rare-Earth Oxide Additions and Heat-Treatment Temperature on the Transformation and Microstructure of Silicon Nitride

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE-Si-Al-O-N (RE = Y or Yb) Glasses

Influence of sintering additives on densification kinetics and high-temperature strength in γ-Y2Si2O7 ceramics

Effect of Re2O3–MgO additives on the microstructure evolution and properties of β-Si3N4 ceramics

Effect of Sintering Additive Composition on Microstructure and Mechanical Properties of Silicon Nitride

Effects of MgSiN2 Addition and Post-Annealing on Mechanical and Thermal Properties of Si3N4 Ceramics

Microstructure and Properties of Porous Si3N4/Dense Si3N4 Joints Bonded Using RE–Si–Al–O–N (RE = Y or Yb) Glasses

Effect of rare earths on mechanical properties and microstructures of Si3N4-based ceramics

Effect of Sm2o3 Additives on the Rod-Like Beta-Si3n4 Crystal of Porous Silicon Nitride Fabricated by Reaction-Bonded

Effect of Composite Sintering Additives Containing Non-Oxide on Mechanical, Thermal and Dielectric Properties of Silicon Nitride Ceramics Substrate

High Thermal Conductivity Silicon Nitride Ceramics Prepared By Pressureless Sintering With Ternary Sintering Additives

A Study on the Effects of Liquid Phase Formation Temperature and the Content of Sintering Aids on the Sintering of Silicon Nitride Ceramics

Effects of MgAl2O4-ZrO2 Addition on Sintering Behaviors and Mechanical Properties of Silicon Nitride Ceramics

Effects of AlN and rare earth fluorides on the thermal conductivity of SiC ceramics with impedance spectroscopy analysis

Influence of Yttria–Alumina Content on Sintering Behavior and Microstructure of Silicon Nitride Ceramics