Abstract:Abstract Layer-structured interphase, existing between reinforcing fiber and ceramics matrix, is an indispensable constituent for fiber-reinforced ceramic composites due to its determinant role in the mechanical behavior of the composites. However, the interphase may suffer high residual stress because of the mismatch of thermal expansion coefficients in the constituents, and this can exert significant influence on the mechanical behavior of the composites. Here, the residual stress in the boron nitride (BN) interphase of continuous SiC fiber-reinforced SiC composites was measured using a micro-Raman spectrometer. The effects of the residual stress on the mechanical behavior of the composites were investigated by correlating the residual stress with the mechanical properties of the composites. The results indicate that the residual stress increases from 26.5 to 82.6 MPa in tension as the fabrication temperature of the composites rises from 1500 to 1650 °C. Moreover, the increasing tensile residual stress leads to significant variation of tensile strain, tensile strength, and fiber/matrix debonding mode of the composites. The sublayer slipping of the interphase caused by the residual stress should be responsible for the transformation of the mechanical behavior. This work can offer important guidance for residual stress adjustment in fiber-reinforced ceramic composites.

Direct Measurement of Residual Stresses and Their Effects on the Microstructure and Mechanical Properties of Heat-Treated Si3N4 Ceramics II: with CeO2 As a Single Additive

Direct Measurement of Residual Stresses and Their Effects on the Microstructure and Mechanical Properties of Heat-Treated Si3N4 Ceramics

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Secondary crystalline phases and mechanical properties of heat-treated Si3N4

Effect of Sintering Additive Composition on Microstructure and Mechanical Properties of Silicon Nitride

Residual stress variation in SiCf/SiC composite during heat treatment and its effects on mechanical behavior

Influence of CeO2 addition on Si3N4 ceramics

Effects of MgSiN2 Addition and Post-Annealing on Mechanical and Thermal Properties of Si3N4 Ceramics

Effects of Interfacial Residual Stress on Mechanical Behavior of SiC F /sic Composites

Effect of Post-Sintering Heat-Treatment on Thermal Conductivity of Si3N4 Ceramics Containing Different Additives

Effects of interfacial residual stress on mechanical behavior of SiCf/SiC composites

Study Of The Comparative Effect Of Sintering Methods And Sintering Additives On The Microstructure And Performance Of Si3n4 Ceramic

Microstructural Evolution and Mechanical Properties in Yb2O3–Fluxed Silicon Nitride Ceramics

Microstructural Evolution and Mechanical Properties in Yb2o3-Fluxed Silicon Nitride Ceramics

Effect of CeO2, Dy2O3, Yb 2O3 and y2O3 additives on thermal conductivity of silicon nitride ceramics

Study of the Thermal Conductivity of Si3N4 Sintered with CeO2 and MgO Additives

Effects of Rare-Earth Oxide Additions and Heat-Treatment Temperature on the Transformation and Microstructure of Silicon Nitride

Phase Evolution in Heat‐Treated Si3N4 with Additions of Yb2O3

Effect of a New Additive on Mechanical Properties of Hot-Pressed Silicon Carbide Ceramics

Effects of sintering additives on mechanical properties and microstructure of Si3N4 ceramics by microwave sintering

Effect Of Microstructural Modification On Thermal Conductivity And Strength Of Silicon Nitride