Investigation on Altitude Correction Factor of Flashover Voltage of Porcelain Insulator for DC Transmission Lines
ZHANG Fu-zeng,YANG Hao-lin,ZHAO Feng,WANG Li-ming,GUAN Zhi-cheng,ZHOU Jun,LI Wu-feng,WEN Hua,MA Yi
DOI: https://doi.org/10.13336/j.1003-6520.hve.2008.03.025
2008-01-01
Abstract:In order to put forward the linear correction factor under different contamination distribution condition,this paper presents the results of study on the contamination characteristics of porcelain insulators under uniform and non-uniform contamination distribution conditions in high altitude areas.The arcing behavior on natural polluted insulator surfaces was studied using a PCI-2000S high speed camera.Experimental results indicated that under uniform contamination,DC arcs levitated more easily from the porcelain surfaces,which led to a low utilization ratio of the insulator leakage distance,and made flashover voltage become very low.With non-uniform contamination,the arcs propagated along the insulator surface making full use of the leakage distance,resulting in a higher flashover voltage than with uniform contamination.Consequently,the effect of altitudes on flashover voltage differed greatly in the two different conditions.Flashover characteristics of 210kN anti-fog insulators were investigated with uniform and non-uniform conditions at different altitudes.Two different linear altitudes correction factors of flashover voltages for different contamination conditions were deduced by comparing the experimental results of 210kN anti-fog insulators at different altitudes.In addition,flashover characteristics of 300kN anti-fog insulator were also studied at different altitudes.Test results for 300kN anti-fog insulator indicate that the linear relationship is in good agreement with 300kN anti-fog insulator.Therefore,these correction factors can be used in outdoor insulation design for DC transmission projects.