Abstract:GeSn materials have attracted considerable attention for their tunable band structures and high carrier mobilities, which serve well for future photonic and electronic applications. This research presents a novel method to incorporate Sn content as high as 18% into GeSn layers grown at 285–320 °C by using SnCl4 and GeH4 precursors. A series of characterizations were performed to study the material quality, strain, surface roughness, and optical properties of GeSn layers. The Sn content could be calculated using lattice mismatch parameters provided by X-ray analysis. The strain in GeSn layers was modulated from fully strained to partially strained by etching Ge buffer into Ge/GeSn heterostructures . In this study, two categories of samples were prepared when the Ge buffer was either laterally etched onto Si wafers, or vertically etched Ge/GeSnOI wafers which bonded to the oxide. In the latter case, the Ge buffer was initially etched step-by-step for the strain relaxation study. Meanwhile, the Ge/GeSn heterostructure in the first group of samples was patterned into the form of micro-disks. The Ge buffer was selectively etched by using a CF4/O2 gas mixture using a plasma etch tool. Fully or partially relaxed GeSn micro-disks showed photoluminescence (PL) at room temperature. PL results showed that red-shift was clearly observed from the GeSn micro-disk structure, indicating that the compressive strain in the as-grown GeSn material was partially released. Our results pave the path for the growth of high quality GeSn layers with high Sn content, in addition to methods for modulating the strain for lasing and detection of short-wavelength infrared at room temperature.

Phase Reaction of Au/Sn Solder Bonding for GaN-based Vertical Structure Light Emitting Diodes

Phase Distribution in Eutectic AuSn Layer Changed by Temperature Ramping Rate and Its Effect on the Performance of GaN-based Vertical Structure LEDs

GaInN Light-Emitting Diodes with Omni-Directional Reflector Using Nanoporous SnO2 Film

Flexible Vertical Structure GaN-based Light Emitting Diodes on an AuSn Substrate

Vertical Electrode Structure GaN Based Light Emitting Diodes

Qd-Led Devices Using Znsno As an Electron-Transporting Layer

Low Temperature Au-In-Au Metallic Bonding and Its Application in the Fabrication of Vcsels

Investigating the Performance and Reliability of Au-Sn Bonded Flip-Chip Micro-LEDs

Low Temperature Au/Sn Solid-Liquid Diffusion Chip-to-Chip Bonding for MEMS Encapsulation

GaN-Based Thin Film Vertical Structure Light Emitting Diodes Fabricated by a Modified Laser Lift-off Process and Transferred to Cu

Low Temperature and Short Time Au/Sn Solid-liquid Diffusion Bonding for 3D Integration

Microstructure Characterization and Interfacial Reactions between Au-Sn Solder and Different Back Metallization Systems of GaAs MMICs

Research on Auto-split GaN-based Vertical Structure LED

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes

Effects of Bonding Materials on Optical–Thermal Performances and High-Temperature Reliability of High-Power LED

A Cu Pillar Bump Bonding Method Using Au-Sn Alloy Cap as the Interconnection Layer

Application of metal interconnection process with micro-LED display by laser-assisted bonding technology

23‐3: Application of Laser‐Assisted Bonding in Micro‐LED display technology

High-Power GaN-Based Vertical Light-Emitting Diodes on 4-Inch Silicon Substrate

Sn-enhanced high-temperature reliability of Cu/Nano-Ag/Cu joint via transient-liquid-phase bonding

Growth and Strain Modulation of GeSn Alloys for Photonic and Electronic Applications