Abstract:GaN/InGaN light emitting diodes(LEDs)grown on sapphire substrates have current transport along the lateral direction.This often results in non-uniform current spreading,which leads to the non-uni-formity of luminescence and the reduction of lifetime.Therefore,proper mesa structure should be designed to improve current spreading.The characteristics of the GaN/InGaN LED have been examined from the view point of uniform current spreading and low series resistance.A steady-state current field model is employed to describe the current spreading of GaN based LED.Finite element method is used to simulate the current distribution of different types of LEDs in three dimensions.The series resistance of the LED is derived from the calculated current spreading.Standards to quantitatively evaluate the uniformity of current spreading are presented.By quantitatively comparing the series resistance and current spreading of LEDs with different mesa structures,we find that that the LED with the interdigitated mesa structure has the lowest series resistance under the process conditions of our lab.Parameters of the interdigitated mesa structure are further optimized based on our model to achieve the smallest series resistance.Two types of LEDs,denoted as Sample A and Sample B,are prepared with a chip size of 1 mm×1 mm.Sample A is fabricated using the optimized interdigitated electrode pattern as described above,while Sample B is fabricated using a ring electrode pattern without optimization for comparison.By measuring the I-V curve,the values of series resistance of the three samples are derived,which are 1.6 Ω and 3.6 Ω for Sample A and Sample B,respectively.The resistance of the former one is only 44.4% of the latter one,which is consistent with the calculated results based on our model.The reduction in resistance will lead to the improvement of the efficiency of LEDs.

Research on Auto-split GaN-based Vertical Structure LED

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes

High-power and reliable GaN-based vertical light-emitting diodes on 4-inch silicon substrate

High-Power GaN-Based Vertical Light-Emitting Diodes on 4-Inch Silicon Substrate

High-output power GaN-LED based on surface plasmon enhancement

Vertical Electrode Structure GaN Based Light Emitting Diodes

Enhanced Light Extraction from a GaN-based Green Light-Emitting Diode with Hemicylindrical Linear Grating Structure.

GaN-Based Thin Film Vertical Structure Light Emitting Diodes Fabricated by a Modified Laser Lift-off Process and Transferred to Cu

GaN-based LEDs with a High Light Extraction Composite Surface Structure Fabricated by a Modified YAG Laser Lift-off Technology and the Patterned Sapphire Substrates

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

Improving Light Output of Vertical-Stand-Type InGaN Light-Emitting Diodes Grown on a Free-Standing GaN Substrate with Self-Assembled Conical Arrays

Improving the External Quantum Efficiency of High-Power GaN-Based Flip-Chip LEDs by Using Sidewall Composite Reflective Micro Structure

Fabrication and Characterization of GaN-Based Micro-LEDs on Silicon Substrate*

Investigations of Sidewall Passivation Technology on the Optical Performance for Smaller Size GaN-Based Micro-LEDs

Research Progress of GaN-based LED on Silicon

Finite Element Model of GaN Based LED and the Optimization of the Mesa Structure

GaN Substrate and GaN Homo-Epitaxy for LEDs： Progress and Challenges

Improving the External Quantum Efficiency of High Power GaN Based Flip-Chip LEDs Using Ag/SiO2/DBR/SiO2 Composite ReflectiveStructure

Comparative Analysis of Microstructure, Electrical and Optical Performance in Sidewall Etching Process for GaN-Based Green Micro-LED

Phase Distribution in Eutectic AuSn Layer Changed by Temperature Ramping Rate and Its Effect on the Performance of GaN-based Vertical Structure LEDs

Growth and Characterization of Micro-LED Based on GaN Substrate