Abstract:Zincblende GaN has the potential to bridge the "green gap" due to the absence of internal electric fields with respect to wurtzite GaN. However, at present, the quality of zincblende GaN light emitting diodes (LEDs) is not yet sufficient for useful efficient green devices. One of the major challenges is the poor spectral purity of the emitted light. A multimicroscopy approach, combining scanning electron microscopy-cathodoluminescence (SEM-CL), scanning transmission electron microscopy (STEM), and scanning electron diffraction (SED), is applied on a single feature to enable cross correlation between techniques and to investigate the possible causes for the broad optical emission of a zincblende GaN LED structure. This investigation demonstrates that SEM-CL on a site-specific TEM cross section prepared by focused ion beam (FIB) microscope can provide access to nanoscale light emission variations that can be directly related to structural differences seen in STEM. We demonstrate that the general large quantum well (QW) emission peak width relates to quantum well thickness and In content fluctuations. Multiple low-energy QW emission peaks are found to be linked with stacking fault bunches that intersect the QWs. Splitting of the QW emission peak is also found to be caused by the formation of wurtzite-phase inclusions associated with twins formed within the zincblende matrix. Our characterization also illustrates the quantum well structure within such wurtzite inclusions and their impact on the optical emission.

Phase Distribution in Eutectic AuSn Layer Changed by Temperature Ramping Rate and Its Effect on the Performance of GaN-based Vertical Structure LEDs

Phase Reaction of Au/Sn Solder Bonding for GaN-based Vertical Structure Light Emitting Diodes

High-output power GaN-LED based on surface plasmon enhancement

GaN-Based Thin Film Vertical Structure Light Emitting Diodes Fabricated by a Modified Laser Lift-off Process and Transferred to Cu

Vertical Electrode Structure GaN Based Light Emitting Diodes

Flexible Vertical Structure GaN-based Light Emitting Diodes on an AuSn Substrate

Research on Auto-split GaN-based Vertical Structure LED

Stripping GaN/InGaN epitaxial films and fabricating vertical GaN-based light-emitting diodes

Qd-Led Devices Using Znsno As an Electron-Transporting Layer

Study of GaN-Based Light-Emitting Diode (LED) With a Hybrid Surface Structure

High-power and reliable GaN-based vertical light-emitting diodes on 4-inch silicon substrate

High-Power GaN-Based Vertical Light-Emitting Diodes on 4-Inch Silicon Substrate

Analysis of the Mechanisms by Which Sputtered AlN Nucleation Layers Enhance the Performance of Red InGaN-based LEDs

Analysis of Junction Temperatures in High-Power GaN-based LEDs

Performance Improvement of Gan-Based Near-Uv Leds with Ingan/Algan Superlattices Strain Relief Layer and Algan Barrier

Improving Light Output of Vertical-Stand-Type InGaN Light-Emitting Diodes Grown on a Free-Standing GaN Substrate with Self-Assembled Conical Arrays

Multimicroscopy of cross-section zincblende GaN LED heterostructure

Enhanced Performance of GaN-Based Single Contact Micro-LED Driven by AC Power Utilizing the Tunnel Junction

Thin Film GaN-Based LEDs on Cu Substrates Fabricated by Laser Lift-Off

Study on Light Extraction from GaN-based Green Light-Emitting Diodes Using Anodic Aluminum Oxide Pattern and Nanoimprint Lithography

Optical Mode Pattern Study of GaN LEDs with and Without Top Nano-Gratings