Abstract:The working condition of the linear compressor greatly affects the performance of the cryocooler. When the cryocooler operates during a transient working state like the cool down process, the linear compressor is also in a transient working state and could lead to deviation from designed steady state condition. In order to study the transient behavior of a linear compressor during the cool down process, a theoretical model based on the finite difference method is proposed. The temperature distribution of the regenerator during the cool down process is calculated. The variation of the impedance of the cold finger is then calculated. The transient behavior of the linear compressor are studied according to the impedance match between the compressor and the cold finger. The theoretical model shows that the transient behavior of the linear compressor is determined by the variation of the cold finger impedance during the cool down process and the increase of the input power could be larger than 40% with constant input voltage through the whole cool down process. A Sage simulation model of the cryocooler is built and the cool down experiments are carried out. The simulation and the experiment results are consistent with the theoretical model. It's also shown that the theoretical model could provide better prediction of the transient behavior of the linear compressor. The study of the transient behavior of the linear compressor could help improve the design and control of the linear compressor especially for the transient process.

Development of a Linear Compressor for Two-Stage Pulse Tube Cryocoolers

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Development of a two-stage pulse tube Stirling cryocooler

Improvement of a Stirling type two-stage pulse tube cryocooler

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

13 K Thermally Coupled Two-Stage Stirling-Type Pulse Tube Refrigerator

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Design and experiment on a single-stage pulse tube cryocooler driven by a linear compressor

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

The Study on a Gas-Coupled Two-Stage Stirling-Type Pulse Tube Cryocooler

Study on the Method of Improving the Input Power of the Linear Compressor in a High Capacity Pulse Tube Cryocooler

Study on a single-stage pulse tube with two-valve double-inlet configuration

Investigation of the frequency and stroke characteristics of two-stage valved linear compressor in a 4 K JT cryocooler

Characterization of a Scroll-Type Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

The Performance of A Linear Compressor with Triangle Flexure Bearings