Abstract:The influences of frequency, pressure ratio, charging pressure and regenerator length on the refrigeration performance of the pulse tube cooler driven by thermoacoustic engine were numerically simulated based on the regenerator simulation software known as REGEN3.2. The lowest no-load temperature of the pulse tube cooler was expected to be 45 K according to the simulation. The effects of working fluid, pressure ratio, acoustic power output device, and regenerator length were investigated experimentally. Experimental results show that the performance of the pulse tube cooler driven by a thermoacoustic engine can be improved significantly by increasing the pressure ratio, decreasing the frequency and properly increasing the charging pressure, which agrees well with the simulation. A single stage Stirling-type pulse tube cooler, with helium as the working fluid, driven by a traveling wave thermoacoustic engine with nitrogen as the working fluid and with a Helmholtz resonator as both acoustic power output device and acoustic pressure amplifier, obtained a lowest no-load temperature of 65 K.

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Thermoacoustically Driven Pulse Tube Cooler below 60K

A pulse tube cooler driven by a standing thermoacoustic engine reached 79.7 K

A thermoacoustically driven pulse tube refrigerator capable of working below 120 K

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

STUDY ON A THERMOACOUSTICALLY DRIVEN PULSE TUBE REFRIGERATOR OPERATING AT 124K

Advances in Thermoacoustic Engine and Its Application to Pulse Tube Refrigeration

Improvement of a Stirling type two-stage pulse tube cryocooler

A 115 K thermoacoustically driven pulse tube refrigerator with low onset temperature

Thermoacoustically driven pulse tube refrigeration below 90K

Thermoacoustically Driven Pulse Tube Refrigeration below 80K by Introducing an Acoustic Pressure Amplifier

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

13 K Thermally Coupled Two-Stage Stirling-Type Pulse Tube Refrigerator

Development of a two-stage pulse tube Stirling cryocooler

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Experimental Investigation Of A Pulse Tube Refrigerator Driven By A Thermoacoustic Prime Mover

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

Investigation on a Thermoacoustically Driven Pulse Tube Cooler Working at 80 K

Simulation and experimental study of pulse tube cooler driven by thermoacoustic engine

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids