Abstract:Linear compressor is widely used to drive Stirling type cryocooler due to its advantages of low vibration, long life and compactness. In practice, it is often expected to operate at or near the resonant state under which it can reduce more mechanical loss and Joule heat loss, and transfer more electric energy into thermal acoustic energy of the gas. It is significant to explore the working characteristics of the linear compressor for realizing its high-efficient operation in the cryocooler system. In this study, considering the effects of both acoustic and mechanical impedances, a mass-gas-spring model is built to investigate the piston stroke amplitude of the linear compressor. Different with previous models that contain some uncertain parameters, an expression of the stroke amplitude that only based on easily obtainable parameters has been deduced for the first time. The calculated curve of the stroke amplitude at different operating frequencies provides a direct indication of whether the compressor is working at its resonant state or not. An existing high power linear compressor has been used to test and verify the equations. The theoretical stroke amplitude curve matches the experimental data quite well with a deviation of less than 10%. Further analyses about the influences of the operating parameters and intrinsic parameters of a compressor on its resonant characteristics have been given, which can be used as guidance of how to well utilize and design a linear compressor for a cryocooler system. (C) 2017 Elsevier Ltd. All rights reserved.

Investigation of the frequency and stroke characteristics of two-stage valved linear compressor in a 4 K JT cryocooler

Development of a Linear Compressor for Two-Stage Pulse Tube Cryocoolers

Design of A Valved Moving Magnet Type Linear Compressor for A Joule-Thomson Cryocooler

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Improvement of a Stirling type two-stage pulse tube cryocooler

Development of a two-stage pulse tube Stirling cryocooler

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Theoretical and Experimental Investigations on the Piston Offset Characteristics in a Four-Stage DC Linear Compressor Unit for a 1.8 K Hybrid Cryocooler

Characterization of a Scroll-Type Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Study on the Stroke Amplitude of the Linear Compressor

Characterization of an Embraco Oil-Free Linear Compressor for Driving JT Cryocoolers Working at Liquid Helium Temperature

Theoretical and Experimental Study for the Transient Behavior of a Linear Compressor During Pulse Tube Cryocooler Cool Down Process

Design and primary experiments for a pneumatically driven split-Stirling cryocooler operating at hundred hertz range

Valve timing effect on the cooling performance of a 4 K pulse tube cooler

Experimental Research on the JT Cycle of Hybrid 4.5K JT Cryocooler

A critical review of precooled JT cryocoolers working at 4 K for space applications

Cfd Modeling And Experimental Verifications Of A Four-Stage Stirling-Type Pulse Tube Cryocooler

Theoretical and Experimental Investigation of A 4 K Single-Stage Stirling Type Pulse Tube Cryocooler with Precooling

The Design Of Linear Compressor Driven Pulse Tube Cryocooler