Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

A critical review of precooled JT cryocoolers working at 4 K for space applications

Preliminary Experimental Study on a Precooled JT Cryocooler Working at 4 K-Open Cycle

Review Of Recent Advances In Stirling-Type Pulse Tube Cryocoolers

Design and Preliminary Experimental Investigation of a 4 K Stirling-type Pulse Tube Cryocooler with Precooling

Advances in high frequency pulse tube cryocooler research(PartⅠ)

The thermal performance model of a 105 mW@4.41 K 4 He Joule-Thomson cryocooler designed for space applications

Theoretical and Experimental Investigation of A 4 K Single-Stage Stirling Type Pulse Tube Cryocooler with Precooling

Essential Improvement of the JT Cryocooler Working at Liquid Helium Temperature for Space: Efficient and Lightweight

Cooling-capacity Characteristics of Helium-4 JT Cryocoolers

Performance of a precooled 4 K Stirling type high frequency pulse tube cryocooler with Gd2O2S

Multi-objective optimization of precooled JT cryocooler working at liquid hydrogen temperature

Temperature behavior of the 4K-class Joule Thomson cooler during the cool-down phase for space science missions

Experimental and Dynamic Simulation Study of the Joule-Thomson Cryocooler Working at Liquid Hydrogen Temperature

Study on Cooling Capacity Characteristics of an Open-Cycle Joule-Thomson Cryocooler Working at Liquid Helium Temperature

Operating Characteristics of a Three-Stage Stirling Pulse Tube Cryocooler Operating Around 5 K

Experimental Study on a Floating Scroll-Type Compressor Driving a Precooled JT Cryocooler

Performance Study on ST/JT Hybrid Cryocoolers Working at Liquid Helium Temperature

Influence of Regenerator Void Volume on Performance of a Precooled 4 K Stirling Type Pulse Tube Cryocooler

Varying Cross-Sectional Area of Regenerator for Improving Efficiency of 4 K Pulse Tube Refrigerator

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application

Numerical and Experimental Study of VM Type Pulse Tube Cryocooler with Multi-Bypass Operating below 4 K