Abstract:The attainment and maintenance of a low temperature environment is essential for aerospace cryogenic detectors to achieve their required performance. Developing cryocoolers with features of high efficiency, compact structure, and long lifetime is the main challenge for cryogenic detector cooling. In this paper, a high efficiency thermally-coupled two-stage Stirling type pulse tube cryocooler working at 35 K for HgCdTe long wave infrared detector cooling is designed and tested. The thermally-coupled type avoids gas distribution at cold side which minimizes the inter-stage influence. The whole cryocooler is driven by one linear compressor which enables compact structure. The influence of operation frequency and mean pressure is studied by numerical calculation and experiments to determine the optimum operation condition. Acoustic impedance characteristics of both stages and the whole cold finger are also analyzed by comparing performance of cryocooler with different frequency, mean pressure and structure dimensions. The distributions of acoustic power and phase angle are presented to study the relation between impedance characteristic and the cooling performance. Impedance match between compressor and cold finger is also discussed by analyzing the efficiency of the linear compressor and the performance of cryocooler with different pulse tubes. Under optimum impedance match and operation condition of a working frequency of 39.2 Hz and a mean pressure of 2.45 MPa, the cryocooler provides a cooling power of 1 W at 35.1 K with an input electrical power of 150 W, which indicates a relative Carnot efficiency of 5%. This is a rather high efficiency for developed Stirling type multi-stage pulse tube cryocooler working at 35 K with only inertance tubes as phase shifter. The development of this cryocooler lays a solid base for the further optimization to realize a competitive candidate for aerospace cooling requirements.

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Improvement of a Stirling type two-stage pulse tube cryocooler

Development of a two-stage pulse tube Stirling cryocooler

13 K Thermally Coupled Two-Stage Stirling-Type Pulse Tube Refrigerator

Development of a Linear Compressor for Two-Stage Pulse Tube Cryocoolers

Study of Mass Flow Distribution Between Stages in A Two-Stage Pulse Tube Cryocooler Capable of 1.1 W at 4.2 K

A Separate Two-Stage Pulse Tube Cooler Working at Liquid Helium Temperature

A two-stage Stirling-type pulse tube cryocooler with a cold inertance tube

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

Performance Improvement of Multi-Stage Pulse Tube Cryocoolers with a Self-Precooled Pulse Tube

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

Study on High Frequency Two-Stage Pulse Tube Refrigeration at 35 K: Part I. Theoretical Analysis

The Study on a Gas-Coupled Two-Stage Stirling-Type Pulse Tube Cryocooler

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor

Two-stage high frequency pulse tube cooler for refrigeration at 25 K

A Three-Stage Stirling Pulse Tube Cryocooler Reached 4.26 K with He-4 Working Fluid

A three-stage Stirling pulse tube cryocooler operating below the critical point of helium-4

A Two-Stage Thermally-Coupled Pulse Tube Cryocooler Working at 35 K for Space Application