Abstract:The high-frequency pulse tube cryocooler (HPTC) has been attracting increasing and widespread attention in the field of cryogenic technology because of its compact structure, low vibration, and reliable operation. The gas-coupled HPTC, driven by a single compressor, is currently the simplest and most compact structure. For HPTCs operating below 20 K, in order to obtain the mW cooling capacity, hundreds or even thousands of watts of electrical power are consumed, where radiation heat leakage accounts for a large proportion of their cooling capacity. In this paper, based on SAGE10, a HPTC heat radiation calculation model was first established to study the effects of radiation heat leakage on apparent performance parameters (such as temperature and cooling capacity), and internal parameters (such as enthalpy flow and gas distribution) of the gas-coupled HPTC. An active thermal insulation method of cascade utilization of the cold energy of the system was proposed for the gas-coupled HPTC. Numerical simulations indicate that the reduction of external radiation heat leakage cannot only directly increase the net cooling power, but also decrease the internal gross losses and increase the mass and acoustic power in the lower-temperature section, which further enhances the refrigeration performance. The numerical calculation results were verified by experiments, and the test results showed that the no-load temperature of the developed cryocooler prototype decreased from 15.1 K to 6.4 K, and the relative Carnot efficiency at 15.5 K increased from 0.029% to 0.996% when substituting the proposed active method for the traditional passive method with multi-layer thermal insulation materials.

Experimental study on a three-stage cascade pulse tube cryocooler with transmission tube

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

Study on A Cascade Pulse Tube Cooler with Energy Recovery: New Method for Approaching Carnot

Performance analysis of a micro-scale pulse tube cryocooler based on optical fiber regenerator

Improvement of a Stirling type two-stage pulse tube cryocooler

Cascading Three Pulse Tube Coolers with Work Recovery

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Study on a Cascade Pulse Tube Cooler with Work Recovery

A Cascade Pulse Tube Cooler Capable of Energy Recovery

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Influence of Hot End Heat Exchangers on Cascading Three Pulse Tube Coolers

Cascade pulse tube method approaching Carnot refrigeration efficiency and its two stage verification

Advances in high frequency pulse tube cryocooler research(PartⅠ)

Performance Improvement of Multi-Stage Pulse Tube Cryocoolers with a Self-Precooled Pulse Tube

Thermal optimization of inter-stage heat exchangers distribution in a three-stage cascading pulse tube cooler

A two-stage Stirling-type pulse tube cryocooler with a cold inertance tube

Performance improvement of a pulse tube cryocooler with a single compressor through cascade utilization of cold energy

Simulation and experimental investigation of single stage high power stirling-type pulse tube cryocooler

Theoretical and Experimental Study on a Pulse Tube Cryocooler Driven with a Linear Compressor

The thermodynamic characteristics of a Stirling/pulse tube hybrid cryocooler

Performance Improvement of Cold Heat Exchanger for a High Power Single-Stage Pulse Tube Cooler.