Abstract:Through comparative investigation on the growth of oxidation-induced stacking faults (OSFs) in heavily antimony (Sb)-doped and phosphorus (P)-doped Czochralski (Cz) silicon wafers with almost the same resistivity, effects of dopants on the growth of OSF in heavily doped n-type Cz silicon are studied experimentally. Moreover, the influences of Sb and P atoms on the recombination of self-interstitials and vacancies are also explored on the basis of the first-principles calculations. It is shown experimentally that all the OSF lengths are almost identical regardless of the type and density of OSF nucleation centers, such as copper precipitates and mechanical scratches etc.. However, it is found that the OSF length of heavily Sb-doped Cz silicon wafer is larger than that of heavily P-doped Cz silicon wafer under the same oxidation condition. Essentially, the OSFs are formed by the aggregation of silicon self-interstitials released at the Si/SiO 2 interface during the oxidation. Therefore, a longer OSF implies that a higher quantity of silicon self-interstitials remains after the recombination of vacancies and silicon self-interstitials in the heavily Sb-doped Cz silicon wafer. The first-principles calculations based on density functional theory (DFT) indicate that Sb atoms combine with vacancies more readily than P atoms. This is actually due to the fact that Sb has a much larger atomic size than P. In other words, as compared with P atoms, the Sb atoms are the more efficient vacancy-trapping centers, thus retarding the recombination of vacancies and silicon self-interstitials. Consequently, the silicon self-interstitials remain after recombination with the vacancies that are much more in heavily Sb-doped Cz silicon wafer than in heavily P-doped counterpart when undergoing the same oxidation. In turn, the OSFs in heavily Sb-doped silicon wafers are relatively longer.

Experimental Study on the Footing Effect for SOG Structures Using DRIE

Experimental Study on the Footing Effect for SOG Structures Using DRIE

Performance comparison of methods to evading notching effect for SOG structures in DRIE

Methods to Protect Silicon Microstructures from the Damages in Deep Reactive Ion Etching

The Method of Prevent Footing Effect in Making SOI Micro-Mechanical Structure

SOI Micro-Accelerometer Fabricated with Anti-Footing Technique

Oxide Or Metal Interface Damage Improvement Of Deep Silicon Etch Process By Low Power Rf Of Low Frequency

An improved method to remove anti-footing Al layer after DRIE

Impact of Gate Structure on the Electrophysiology Detection Behaviors for SOI Ion-Sensitive FETs

Study of Silicon-on-glass Waveguides

Test Structures and Drie Topography for Bulk Silicon Mems Devices

High Performance Junctionless FDSOI SiGe Channel P-Finfet with High ION/IOFF Ratio and Excellent SS

Germanium Doping of Si Substrates for Improved Device Characteristics and Yield

Effects of dopants on the growth of oxidation-induced stacking faults in heavily doped n-type Czochralski silicon

Study of Local Stress Using Stress-Absorbing Si Diaphragm

Germanium doping for improved silicon substrates and devices

Study of the Heavy Metal Gettering Effect of Porous Silicon on SOI Structure

Investigation Of Fabricating Ultra Deep And High Aspect Ratio Electrical Isolation Trench Without Void

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

A Dual-Purpose Method to Enhance Heat Transfer and Prevent Notching Effect in Deep Reactive Ion Etching

Study of heat transfer on notching effect in DRIE