Abstract:Microdevices prepared in a silicon substrate have been widely used in versatile fields due to the matured silicon-based microfabrication technique and the excellent physical properties of silicon material. However, the high thermal conductivity of silicon restricts its application in most thermal microdevices, especially devices comprising different temperature zones. In this work, a parylene-filled-trench technique was optimized to realize high-quality thermal isolation in silicon-based microdevices. Parylene C, a heat transfer barricading material, was deposited on parallel high-aspect-ratio trenches, which surrounded the isolated target zones. After removing the remnant silicon beneath the trenches by deep reactive ion etching from the back side, a high-quality heat transfer barrier was obtained. By using narrow trenches, only 5 mu m thick parylene was required for a complete filling, which facilitated multi-layer interconnection thereafter. The parylene filling performance inside the high-aspect-ratio trench was optimized by two approaches: multiple etch-deposition cycling and trench profile controlling. A 4 x 6 array, in which each unit was kept at a constant temperature and was well thermally isolated individually, was achieved on a silicon substrate by using the present parylene-filled-trench technique. The preliminary experimental results indicated that the present parylene-filled-trench structure exhibited excellent thermal isolation performance, with a very low power requirement of 0.134 mW (K mm(2))(-1) for heating the isolated silicon unit and a high thermal isolation efficiency of 72.5% between two adjacent units. Accompanied with high-quality isolation performance, the microdevices embedded the present parylene-filled-trench structure to retain a strong mechanical connection larger than 400 kPa between two isolated zones, which is very important for a high-reliability-required micro-electro-mechanical-system (MEMS) device. Considering its room-temperature processing essence, the present parylene-filled-trench technique is believed to be a promising isolation method in the post-complementary metal oxide semiconductor MEMS integration.

Investigation Of Fabricating Ultra Deep And High Aspect Ratio Electrical Isolation Trench Without Void

Fabrication of keyhole-free ultra-deep high-aspect-ratio isolation trench and its applications

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application

Fabrication of Ultra Deep Electrical Isolation Trenches with High Aspect Ratio Using DRIE and Dielectric Refill

Fabrication Challenges and Test Structures for High-Aspect-ratio SOI MEMS Devices with Refilled Electrical Isolation Trenches

Challenges and Solutions for Fabricating Isolation Trenches for High Aspect Ratio Sensors

Deep trench refilling with parylene C for high-quality isolation in bulk micromachined devices

Research on Integrated Trench Etching for Trench-Type Power MOSFET

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

A Parylene-Filled-Trench Technique for Thermal Isolation in Silicon-Based Microdevices

A polymer trench filling based silicon isolation technique and its application to two-axis scanning comb-drive micromirrors

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

An ultra-deep TSV technique enabled by the dual catalysis-based electroless plating of combined barrier and seed layers

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

The Optimization and Fabrication of High Electron Mobility Transistors Integrated with Microstructure

A Novel Isolation Technology in Bulk Micromachining Using Deep Reactive Ion Etching and A Polysilicon Refill

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Advanced plasma processing combined with trench isolation technology for fabrication and fast prototyping of high aspect ratio MEMS in standard silicon wafers

Fabrication and Electrical Characterization of High Aspect Ratio Through-Silicon Vias with Polyimide Liner for 3D Integration

Investigation and Modeling of Etching Through Silicon Carbide Vias (TSiCV) for SiC Interposer and Deep SiC Etching for Harsh Environment MEMS by DoE

CMOS-compatible micromachining techniques for fabricating high-performance edge-suspended RF/microwave passive components on silicon substrates