Abstract:A novel micromachining technology for multilevel structures of silicon is described in this paper. Complicated multilevel structures can be formed by using a maskless etching following a conventional masked etching in aqueous KOH. The process consists of two successive steps. First, structures with (111) sidewalls are formed for a desired etching depth on the surface of a (100) silicon wafer by a conventional masked anisotropic etching process with a specially designed etching mask. Then, the etching mask is removed except for some areas (such as the frame of the chip) and a maskless etching follows. In addition to the downward etching of the upper and lower (100) planes during maskless etching, fast-etching (311) planes emerge at the upper edges of the (111) sidewalls and cut the (111) sidewalls, while the (111) sidewalls extend downward at the lower ends. As the (311) planes replace the (111) sidewalls with a rate faster than the extension rate of the (111) planes, the (111) sidewalls will finally be replaced by (311) planes. Moreover, by an appropriate mask design and an appropriate etching depth of the previous masked etching, the bottom areas of some etching cavities diminish temporarily so that the downward etching in these areas is stopped for time intervals after the intersection of (111) planes on the bottom and before the (111) planes are replaced completely by the (311) planes. Once the (111) sidewalls are replaced completely by the (311) planes, the bottom areas reappear and the etching downward resumes. Analyses show that levels with different depths can be created in this way for different window apertures and the number, positions as well as the depths of the new levels can be individually decided by the design of the single mask for masked etching and the etch depths of both masked and maskless etching processes. More than 10 interesting multilevel structures with up to five structure levels have been fabricated. The results show that the technology is very versatile and repeatable. Therefore, this technology is a very useful new tool for making silicon micromechanical structures to meet the ever-increasing demands for solid-state sensors and actuators. (C) 1997 Elsevier Science S.A.

A Novel Isolation Technology in Bulk Micromachining Using Deep Reactive Ion Etching and A Polysilicon Refill

Deep trench refilling with parylene C for high-quality isolation in bulk micromachined devices

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application

Fabrication of Ultra Deep Electrical Isolation Trenches with High Aspect Ratio Using DRIE and Dielectric Refill

Bulk Micromachining Fabrication Platform Using the Integration of DRIE and Wet Anisotropic Etching

Improvement on the Uniformity of Deep Reactive Ion Etch for Electrically Isolated Silicon-Based Substrates

A Parylene-Filled-Trench Technique for Thermal Isolation in Silicon-Based Microdevices

Fabrication of keyhole-free ultra-deep high-aspect-ratio isolation trench and its applications

Advanced plasma processing combined with trench isolation technology for fabrication and fast prototyping of high aspect ratio MEMS in standard silicon wafers

Investigation Of Fabricating Ultra Deep And High Aspect Ratio Electrical Isolation Trench Without Void

A Bulk Micromachined Relay with Lateral Contact and Isolation Structure

Silicon Micromachining Of High Aspect Ratio, High-Density Through-Wafer Electrical Interconnects For 3-D Multichip Packaging

Maskless Anisotropic Etching-a Novel Micromachining Technology for Multilevel Microstructures

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

A New Release Process in Surface Micromachining-Double Mask Technology

A novel micromachining technology for multilevel structures of silicon

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Oxide Or Metal Interface Damage Improvement Of Deep Silicon Etch Process By Low Power Rf Of Low Frequency

Fabrication and Testing Investigation of Low-Voltage Integrated Electrophoresis Chip Based on Silicon-on-insulator-mems

High Aspect Ratio Si Etching Technique and Application

A New Release Process for Polysilicon Surface Micromachining Using Sacrificial Polysilicon Anchor and Photolithography after Sacrificial Etching