Abstract:We have developed a microfabrication process for high aspect ratio thick silicon wafer molds and electroplating using flipchip bonding with THB 151N negative photoresist (JSR micro). This fabrication technique includes large area and high thickness silicon wafer mold electroplating. The process consists of silicon deep reactive ion etching (RIE) of the silicon wafer mold, photoresist bonding between the silicon mold and the substrate, nickel electroplating and a silicon removal process. High thickness silicon wafer molds were made by deep RIE and flipchip bonding. In addition, nickel electroplating was developed. Dry film resist (ORDYL MP112, TOK) and thick negative-tone photoresist (THB 151N, JSR micro) were used as bonding materials. In order to measure the bonding strength, the surface energy was calculated using a blade test. The surface energy of the bonding wafers was found to be 0.36–25.49 J m−2 at 60–180 °C for the dry film resist and 0.4–1.9 J m−2 for THB 151N in the same temperature range. Even though ORDYL MP112 has a better value of surface energy than THB 151N, it has a critical disadvantage when it comes to removing residue after electroplating. The proposed process can be applied to high aspect ratio MEMS structures, such as air gap inductors or vertical MEMS probe tips.

Fabrication Challenges and Test Structures for High-Aspect-ratio SOI MEMS Devices with Refilled Electrical Isolation Trenches

Challenges and Solutions for Fabricating Isolation Trenches for High Aspect Ratio Sensors

Investigation Of Fabricating Ultra Deep And High Aspect Ratio Electrical Isolation Trench Without Void

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

Fabrication of SOI MEMS Inertial Sensors with Dry Releasing Process

A CMOS Compatible Process for Monolithic Integration of High-Aspect-ratio Bulk Silicon Microstructures

Fabrication of ultra-deep high-aspect-ratio isolation trench without void and its application

Post-CMOS Process for High-Aspect-ratio Monolithically Integrated Single Crystal Silicon Microstructures

Fabrication of keyhole-free ultra-deep high-aspect-ratio isolation trench and its applications

An SOI-based post-fabrication process for compliant MEMS devices

Advanced plasma processing combined with trench isolation technology for fabrication and fast prototyping of high aspect ratio MEMS in standard silicon wafers

Compact Electrode Design for an In-Plane Accelerometer on SOI with Refilled Isolation Trench

A Single Mask Dry Releasing Process for Making High Aspect Ratio Soimemsdevices.

Fabrication and Characterization of a Low Parasitic Capacitance and Low-Stress Si Interposer for 2.5-D Integration

Deep trench refilling with parylene C for high-quality isolation in bulk micromachined devices

Fabrication of Ultra Deep Electrical Isolation Trenches with High Aspect Ratio Using DRIE and Dielectric Refill

Compact electrode design for in-plane accelerometer on SOI with refilled isolation trench

Fabrication of a high aspect ratio thick silicon wafer mold and electroplating using flipchip bonding for MEMS applications

Design and fabrication of MEMS devices using the integration of MUMPs, trench-refilled molding, DRIE and bulk silicon etching processes

Test Structures and Drie Topography for Bulk Silicon Mems Devices

Fabrication of MEMS Resonators in Thin SOI