Abstract:In this paper, double-clamped beam with a mass at the center has been fabricated on substrate of a Silicon-on-Insulator (SOI) wafer. Thin layer SOI Field-Effect Transistors (SOI-FETs) have been integrated at ends of the beam on top layer of the SOI wafer, which can be used for stress-sensing. Such a structure can be used as an accelerometer. The applied acceleration can be detected directly by the changing of the drain current. The measured sensitivity and noise floor of the device are 0.91 mV/g and 13 mg/Hz(-1/2). As expected performance of the SOI-FETs, such an accelerometer can be used in a wide temperature range (-60 degrees C to 200 degrees C) in some special applications, such as military, automobile, nuclear and well-logging industry application.Note to Practitioners-This paper describes the method for stress-sensing using the thin layer Silicon-on-Insulator Field-Effect Transistors (SOI-FETs). This method is characterized with adjustable sensitivity and wide working temperature range and is expected to apply in strain gauges, pressure sensors, accelerometers, and cantilever force/displacement sensors. In the paper we take the application in accelerometers for example. A structure of double-clamped beam with a mass at the center has been fabricated on the substrate of a SOI wafer. Based on the devices, we have measured the characteristics of the sensitivity, the noise floor and the working temperature, which is critical in some applications such as military, automobile, nuclear, and well-logging industry application.

Compact electrode design for in-plane accelerometer on SOI with refilled isolation trench

Compact Electrode Design for an In-Plane Accelerometer on SOI with Refilled Isolation Trench

An In-Plane Low-Noise Accelerometer Fabricated with an Improved Process Flow

A Three-Axis SOI Accelerometer Sensing with Both In-Plane and Vertical Comb Electrodes

Thin Layer Soi-Fets Used for Stress-Sensing and Its Application in Accelerometers

A Novel Soi Z-axis Accelerometer with Gap Closing Differential Sensing Electrodes

A novel SOI-based single proof-mass 3-axis accelerometer with gap-closing differential capacitive electrodes in all sensing directions

A Novel Scheme Design of a High-G Optical NEMS Accelerometer Based on a Single Chip Grating with Proper Sensitivity and Large Bandwidth

Implementation of A Gap-Closing Differential Capacitive Sensing Z-Axis Accelerometer on an Soi Wafer

Design, fabrication and testing of a SOI accelerometer

Three-Axis Capacitive SOI Accelerometer Using Combination of In-Plane and Vertical Comb Electrodes

A Novel Accelerometer On (111) Substrate With Differential Electrode

A MEMS Sandwich Differential Capacitive Silicon-on-insulator Accelerometer

Fabrication Challenges and Test Structures for High-Aspect-ratio SOI MEMS Devices with Refilled Electrical Isolation Trenches

Challenges and Solutions for Fabricating Isolation Trenches for High Aspect Ratio Sensors

A Novel Cmos Out-Of-Plane Accelerometer with Fully Differential Gap-Closing Capacitance Sensing Electrodes

A novel capacitive accelerometer with an eight-beam-mass structure by self-stop anisotropic etching of (1 0 0) silicon

Design and Fabrication Research on a Capacitive Accelerometer

A Sub-µg Bias-Instability MEMS Oscillating Accelerometer with an Ultra-Low-Noise Read-Out Circuit in CMOS

A single-mask dry-release process for fabrication of high aspect ratio SOI MEMS devices

A poly-Si based 2-axis differential capacitive-sensing accelerometer