Abstract:Laser lift‐off (LLO) is commonly applied to separate functional thin films from the underlying substrate, in particular light‐emitting diodes (LEDs) on gallium nitride (GaN) basis from sapphire. By transferring the LED layer stack to foreign carriers with tailored characteristics, e.g., highly‐reflective surfaces, the performance of opto‐electronic devices can drastically be improved. Conventionally, LLO is conducted with UV laser pulses in the nanosecond regime. When directed to the sapphire side of the wafer, absorption of the pulses in the first GaN layers at the sapphire/GaN interface leads to detachment. In this work, a novel approach towards LLO based on femtosecond pulses at 520 nm wavelength is demonstrated for the first time. Despite relying on two‐photon absorption with sub‐band gap excitation, the ultrashort pulse widths may reduce structural damage in comparison to conventional LLO. Based on a detailed study of the laser impact as a function of process parameters, a two‐step process scheme has been developed to create free‐standing InGaN/GaN‐LED chips with up to 1.2 mm edge length and ≈5 µm thickness. The detached chips were assessed by scanning electron microscopy and cathodoluminescence, revealing similar emission properties before and after LLO.This article is protected by copyright. All rights reserved.

Cleaved Laser Facets on Free‐standing InGaN LD Membrane Created by Laser Lift‐off and Structural Characterisation of the Membrane

Diffractive Characteristics of Laser Assisted Chemical Etching GaAs

Monolithic Integration of a High-Quality Factor Lithium Niobate Microresonator with a Free-Standing Membrane Waveguide Using Femtosecond Laser Assisted Ion Beam Writing (FLAIBW)

On-wafer fabrication of cavity mirrors for InGaN-based laser diode grown on Si

Etched facet and semiconductor/air DBR facet of a AlGaInP laser diode prepared by focused ion beam milling

Femtosecond Laser Lift‐Off with Sub‐Bandgap Excitation for Production of Free‐Standing GaN Light‐Emitting Diode Chips

Study Of The Structural Damage In The (0001) Gan Epilayer Processed By Laser Lift-Off Techniques

Cathodoluminescence Study of InGaN MQW Laser Diodes Using Laser Lift‐off Technique

Preparation of GaN-based cross-sectional TEM specimens by laser lift-off.

Study of laser-debonded GaN light emitting diodes

Facet passivation process of high-power laser diodes by plasma cleaning and ZnO film

Study of GaN Light-Emitting Diodes Obtained by Laser-Assisted Debonding

Enhancement of Extraction Efficiency in Laser-debonded GaN Light Emitting Diodes

Optical Defect in Gan-Based Laser Diodes Detected by Cathodoluminescence

Influence Of Patterned Tio2/Sio2 Dielectric Multilayers For Back And Front Mirror Facets On Gan-Based Laser Diodes

Vertical Electrode Structure GaN Based Light Emitting Diodes

Study of the Laser Lift-off Technology of GaN Films from Sapphire Substrates

Focused Ion Beam Etched Nitride/Air Dbrs As Cavity Mirror Facets of Violet Ingan/Gan Multiple-Quantum Well Laser Diodes

Laser slicing: a thin film lift-off method for GaN-on-GaN technology

Photoluminescence from InGaN/GaN MQWs on Sapphire and Membranes Fabricated by Laser Lift‐off

Optically Pumped AlGaN Double Heterostructure Deep-UV Laser by Molecular Beam Homoepitaxy: Mirror Imperfections and Cavity Loss