Abstract:Molten oxide electrolysis is a promising route to reduce harmful environmental effects that occur when compared to more common industrial metal extraction techniques. This method can provide a stepping stone to decarbonise metal production and to do this suitable supporting electrolyte ore combinations need to be found. For the application of extracting titanium metal, due to the lack of electrochemical information on complex multi-component titanium metal oxide systems, designing an electrolytic cell and predicting ultra-high temperature (above 1500°C) behaviours becomes difficult. Hence, to gain insight into this electrochemical information a binary system, TiO 2 – Na 2 O, was investigated via experimentation and the use of FactSage 7.2 (a thermodynamic predictive software). This system was chosen as the phase diagram indicated deep eutectics either side of a congruently melting line compound situated at approximately 40 wt% TiO 2 , hence providing suitable operating temperature and composition ranges. Additionally, FactSage predicted that the relative potentials of the half-cell reactions 2Na 2 O → 4Na + O 2 and TiO 2 → Ti + O 2 , change order when the composition of TiO 2 is increased from below the congruently melting line compound, to above, indicating that above approximate 40 wt% TiO 2 , titanium metal may be favourably reduced first when electrolytically reducing the melt. Lab scale experimental process conditions (temperature and composition) were studied to determine the feasibility of electrolytically reducing titanium metal from the molten oxide mixture. From our research, expansion into other binary oxide systems for different metals of interest, specifically neodymium and tantalum, will be discussed. Specifically, systems that contain congruently melting line compounds with adjacent eutectic reactions were hypothesised to have a similar reordering of the half-cell potentials, favouring the reduction of the desired metals (Nd or Ta). Understanding simplified binary systems will scaffold insight into more complex, industrially-relevant molten oxide mixtures at ultra-high temperatures, potentially contributing to the discovery of new and more sustainable electrochemical pathways for technology-critical metals.

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Reducing Carbon Contamination by Controlling CO32− Formation During Electrochemical Reduction of TiO2

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process

Investigation of the Calciothermic Reduction of TiO 2 for the Green Production of Ti and TiH 2 Powders

Direct oxygen removal technique for recycling titanium using molten MgCl 2 salt

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Electrochemical extraction of Ti5Si3 silicide from multicomponent Ti/Si-containing metal oxide compounds in molten salt

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Electrolytic reduction of Gd2O3-ZnO in NaCl-CaCl2 Molten Salt

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt

Composition and structure of Ti–Al alloy powders formed by electrochemical co-deposition in KCl–LiCl–MgCl2–TiCl3–AlCl3 molten salt

Characterisation of Electrochemical Properties for Molten Titanium(IV) Oxide - Sodium Oxide and Expansion into Other Binary Oxide Systems for the Electrolytic Reduction of Valuable Metals

The Electrolytic Reduction of Gd 2 O 3 in LiCl-KCl-Li 2 O Molten Salt