Abstract:Molten oxide electrolysis is a promising route to reduce harmful environmental effects that occur when compared to more common industrial metal extraction techniques. This method can provide a stepping stone to decarbonise metal production and to do this suitable supporting electrolyte ore combinations need to be found. For the application of extracting titanium metal, due to the lack of electrochemical information on complex multi-component titanium metal oxide systems, designing an electrolytic cell and predicting ultra-high temperature (above 1500°C) behaviours becomes difficult. Hence, to gain insight into this electrochemical information a binary system, TiO 2 – Na 2 O, was investigated via experimentation and the use of FactSage 7.2 (a thermodynamic predictive software). This system was chosen as the phase diagram indicated deep eutectics either side of a congruently melting line compound situated at approximately 40 wt% TiO 2 , hence providing suitable operating temperature and composition ranges. Additionally, FactSage predicted that the relative potentials of the half-cell reactions 2Na 2 O → 4Na + O 2 and TiO 2 → Ti + O 2 , change order when the composition of TiO 2 is increased from below the congruently melting line compound, to above, indicating that above approximate 40 wt% TiO 2 , titanium metal may be favourably reduced first when electrolytically reducing the melt. Lab scale experimental process conditions (temperature and composition) were studied to determine the feasibility of electrolytically reducing titanium metal from the molten oxide mixture. From our research, expansion into other binary oxide systems for different metals of interest, specifically neodymium and tantalum, will be discussed. Specifically, systems that contain congruently melting line compounds with adjacent eutectic reactions were hypothesised to have a similar reordering of the half-cell potentials, favouring the reduction of the desired metals (Nd or Ta). Understanding simplified binary systems will scaffold insight into more complex, industrially-relevant molten oxide mixtures at ultra-high temperatures, potentially contributing to the discovery of new and more sustainable electrochemical pathways for technology-critical metals.

Electrochemical extraction of Ti5Si3 silicide from multicomponent Ti/Si-containing metal oxide compounds in molten salt

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process

Revealing Salt-Expedited Reduction Mechanism for Hollow Silicon Microsphere Formation in Bi-Functional Halide Melts

Preparation of TiC/SiC composites from Ti-enriched slag by an electrochemical process in molten salts

Lithiation of SiO2 in Li-ion Batteries: in Situ Transmission Electron Microscopy Experiments and Theoretical Studies.

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Electrolytic synthesis of TiC/SiC nanocomposites from high titanium slag in molten salt

Electrodeposited SiO2 film: a promising interlayer of a highly active Ti electrode for the oxygen evolution reaction

Electrolytic preparation of porous TiSi2/Si nanocomposites and the electrochemical performances as lithium-ion battery anode

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Effect of Reaction Temperature on the Molten Salt Electrodeposition of Silicide Coating on Molybdenum Substrate and its Oxidation Behavior

Controllable syntheses of Mo5Si3 and Mo3Si by silicothermic reduction of MoS2 in the presence of lime

Characterisation of Electrochemical Properties for Molten Titanium(IV) Oxide - Sodium Oxide and Expansion into Other Binary Oxide Systems for the Electrolytic Reduction of Valuable Metals

Anion-Exchange-Driven Disassembly of a SiO2/CTAB Composite Mesophase: the Formation of Hollow Mesoporous Silica Spheres

Molten Salts Etching Route Driven Universal Construction of MXene/Transition Metal Sulfides Heterostructures with Interfacial Electronic Coupling for Superior Sodium Storage

Liquid zinc assisted electro-extraction of molybdenum

Titanium metallization of Si3N4 ceramics by molten salt reaction: Mechanism and interfacial structure

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Separation mechanism of a Si+TiSi2 eutectic alloy and metal impurity Fe segregation via electromagnetic directional solidification of Ti-80 wt%Si alloy melt