Abstract:In this paper, a new short process integrating carbochlorination and electrolyzation to produce metallic titanium in molten NaCl–CaCl2 electrolyte was presented. This electrochemical experiment was carried out at 1123 K using carbon-doped TiO2 precursors. The electrolysis process of intermediate produced by carbochlorination of carbon-doped TiO2 precursors was studied. The cathodic product was analyzed using X-ray diffraction (XRD), inductively coupled plasma atomic emission spectroscopy (ICP-AES) and scanning electron microscopy (SEM) after electrolysis. The evolved gas was analyzed by a gas chromatograph equipped with a thermal conductivity detector (GC-TCD). Results showed that Ti powder of 98.7% could be obtained as the final product in the cathode by electrolysis for 5 h at 4.0 V using raw pellets with a C/TiO2 mass ratio of 0.15. Furthermore, the electrochemical process of Ti deposition was comprehensively evaluated by cyclic voltammetry and squarewave voltammetry. The electrode reaction mechanisms and particle evolution principles in molten salt during this electrolysis process were discussed. It indicated that titanium chloride in lower valence (TiCl3) with more productive advantage could exist as an intermediate, and Ti3+ ions were reduced to Ti metal by a two-step mechanism corresponding to the pathway: Ti3+ → Ti2+ → Ti.

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate

Direct Electrosynthesis of Fe-TiC Composite from Natural Ilmenite in Molten Calcium Chloride

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Iron Extraction from South African Ilmenite Concentrate Leaching by Hydrochloric Acid (HCl) in the Presence of Reductant (Metallic Fe) and Additive (MgSO4)

A Novel Technology for the Refinement of Low-Grade Ilmenite Concentrate

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Fundamental Study on Utilization of Titanium Resources by RHF Process

Fabrication of U-Ti alloy through direct electro-reduction from U3O8 and TiO2 mixtures in LiCl molten salt

Extraction of titanium from different titania precursors by the FFC Cambridge process

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt