Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt

Carbochlorination of Low-Grade Titanium Slag to Titanium Tetrachloride in Molten Salt

Composition and structure of Ti–Al alloy powders formed by electrochemical co-deposition in KCl–LiCl–MgCl2–TiCl3–AlCl3 molten salt

Chlorination Behavior of Low-Grade Titanium Slag in AlCl3-NaCl Molten Salt

Electrochemical synthesis of Ti–Al–V alloy by chlorination of Ti2O3 and V2O3 in AlCl3-containing molten chloride salt

The Coordination of Titanium Ions and the Electrocrystallization Mechanism in Molten Chloride-Fluoride Salts

Fundamental study on synthesis and enrichment of titanium subchloride

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Electrodeposition of titanium from chloride melts

A New Method for Preparing Titanium Aluminium Alloy Powder

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate

First‐Principles Molecular Dynamics Study on Ionic Structure and Transport Properties of NaCl‐MgCl2‐CaCl2 Ternary Molten Salt System

Direct selective extraction of titanium silicide Ti5Si3 from multi-component Ti-bearing compounds in molten salt by an electrochemical process