Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Low Temperature Electrodeposition of Titanium in Fluoride-Added LiCl–KCl–CsCl Molten Salt

Electrodeposition of titanium from chloride melts

Formation of Titanium Oxide on Nonmetal Substrates and the Coordination Structure of Titanium Ions in Molten Lif-KF

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Direct electrochemical reduction of low titanium chlorides into titanium aluminide alloy powders from molten eutectic KCl–LiCl–MgCl2

Electrochemical Anodic Dissolution Kinetics of Titanium in Fluoride-Containing Perchloric Acid Solutions at Open-Circuit Potentials

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

The Coordination of Titanium Ions and the Electrocrystallization Mechanism in Molten Chloride-Fluoride Salts

Effects of F- on the electrochemical properties and electrodeposition nucleation mechanism of Ce(III) in LiCl-KCl Melts

Direct Electro-deoxidation of Ilmenite Concentrate to Prepare FeTi Alloy in CaCl2 Molten Salt

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

Titanium Film Formation at the Interface Between Liquid Rare-Earth Metal and Molten Salt

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

Composition and structure of Ti–Al alloy powders formed by electrochemical co-deposition in KCl–LiCl–MgCl2–TiCl3–AlCl3 molten salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Experimental investigation on the formation mechanism of the TiFe alloy by the molten-salt electrolytic titanium concentrate

Dissolution of tungsten carbide and valence analysis of tungsten ions in chloride–fluoride molten salts

Synthesis of Ti powders with different morphologies via controlling the valence state of the titanium ion in KCl-NaCl molten salt