Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Fundamental study on synthesis and enrichment of titanium subchloride

High-Speed Titanium Production by Magnesiothermic Reduction of Titanium Trichloride

Producing titanium by reducing TiCl2-MgCl2 mixed salt with magnesium in the molten state

Reaction-Mediator-Based Chlorination for the Recycling of Titanium Metal Scrap Utilizing Chloride Waste

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Investigation on the reaction progress of titanium and lead chloride in NaCl-KCl melt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Carbochlorination of Low-Grade Titanium Slag to Titanium Tetrachloride in Molten Salt

Titanium powder production by TiCl4 gas injection into magnesium through molten salts

Magnesiothermic Reduction of TiO2 Assisted by LaCl3

Effective Deoxidation Process of Titanium Scrap Using MgCl2 Molten Salt Electrolytic

In-situ Synthesis of Nanocrystalline TiC Powders, Nanorods, and Nanosheets in Molten Salt by Disproportionation Reaction of Ti(II) Species

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Equilibrium between titanium ions and high-purity titanium electrorefining in a NaCl-KCl melt

Recent Studies on Titanium Refining: 2017–2020

Chlorination Behavior of Low-Grade Titanium Slag in AlCl3-NaCl Molten Salt

A New Method for Preparing Titanium Aluminium Alloy Powder

Investigation of the Calciothermic Reduction of TiO 2 for the Green Production of Ti and TiH 2 Powders

Evolution of Molten Salt Electrolysis in Titanium Production Process