Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Investigation of the Calciothermic Reduction of TiO 2 for the Green Production of Ti and TiH 2 Powders

Lanthanothermic Reduction of TiO2

Magnesiothermic Reduction of TiO2 Assisted by LaCl3

Novel Process for Titanium Dioxide Production from Titanium Slag: NaOH-KOH Binary Molten Salt Roasting and Water Leaching

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Production of High-Grade Titanium Dioxide Directly from Titanium Ore Using Titanium Scrap and Iron Chloride Waste

New Method for Low-Cost Titanium Production

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Fundamental study on synthesis and enrichment of titanium subchloride

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Producing titanium by reducing TiCl2-MgCl2 mixed salt with magnesium in the molten state

Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride

High-Speed Titanium Production by Magnesiothermic Reduction of Titanium Trichloride

Room‐Temperature Hydrolysis of Potassium Titanyl Oxalate and Water‐Assisted Crystallization for TiO2 with High Photocatalytic Activity

Development of deoxidation process for off-grade titanium sponge using magnesium metal with wire mesh strainer type of crucible

Review—Progress in Research and Application of Molten Salt Electrolysis for Titanium Extraction

A New Method for Preparing Titanium Aluminium Alloy Powder

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt