Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride

Production of High-Grade Titanium Dioxide Directly from Titanium Ore Using Titanium Scrap and Iron Chloride Waste

Removal of Iron from Titanium Ore through Selective Chlorination Using Magnesium Chloride

Thermodynamic Consideration of the Removal of Iron from Titanium Ore by Selective Chlorination

The Hydrometallurgical Approach in the Production of a High Content of Titanium Dioxide (TiO2) from Ilmenite, Direct Hydrochloric and Sulfuric Acid Leaching and Pre-Treatment Methods: A Review

Chlorination of Synthetic Rutile with Carbon Tetrachloride at Low Temperature for Producing Titanium Tetrachloride

Comparison of Methods for Electrochemical Iron Removal from Titanium Ores

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Recovery of titanium metal scrap by utilizing chloride wastes

Iron Extraction from South African Ilmenite Concentrate Leaching by Hydrochloric Acid (HCl) in the Presence of Reductant (Metallic Fe) and Additive (MgSO4)

Magnesiothermic Reduction of TiO2 Assisted by LaCl3

Direct production of low-oxygen-concentration titanium from molten titanium

Solvent Extraction of Titanium from Ilmenite Hydrochloric Acid Leachate: Optimization and Investigation of Extraction Reactions of All Contained Metal Ions

High-Speed Titanium Production by Magnesiothermic Reduction of Titanium Trichloride

Mechano-thermic reduction of low-grade titanium ore for high-grade TiO2 synthesis

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Lanthanothermic Reduction of TiO2

Nonhazardous Process for Extracting Pure Titanium Dioxide Nanorods from Geogenic Ilmenite

Purification of titanium tetrachloride from titania slag chlorination

Enhancement of the Low Temperature Chlorination of Ilmenite with CCl4 by Adding Cl2

Fundamental study on synthesis and enrichment of titanium subchloride