Abstract:Malaysian ilmenite from “amang” or tin mining waste is well known for its physical and chemical complexity, making it difficult to be treated conventionally. With knowledge of ilmenite is rich in titania and iron, extractive efforts were made in order to segregate and recover the components of ilmenite, with major interest being the removal and retrieval of titanium. In this study, the extent of chlorination execution is observed by means of weight loss studies under various parameters, with an aim of successful chlorination at lower temperatures. At 723 K, chlorination trials were done using gaseous hydrogen chloride (gHCl), carbon monoxide-chlorine gas mixtures (gCO-Cl) and gaseous carbon tetrachloride (gCT). It was clearly seen that at such a relatively low temperature, only gCT was able to obtain a good chlorination degree, with up to 90% chlorination of –45+37 μm ilmenite particles were observed after 1 hour of reaction. With similar size fraction and time, hydrogen chloride was only able to give approximately 6% of chlorination while the mixture of carbon monoxide and chlorine was seen incapable of giving anything higher than a 6% reaction. Initial observation suggests that the chlorination of ilmenite by carbon tetrachloride physically resembles the core shrinking model, although proper kinetic studies needs to be done to confirm this. Changes in various parameter values are seen to be quite sensitive to the overall ilmenite chlorination (via gCT) process. This study have shown that gCT presents an interesting route for the chlorination of complex ores such as ilmenite.

Enhancement of the Low Temperature Chlorination of Ilmenite with CCl4 by Adding Cl2

Low Temperature Phase Transition of Ilmenite during Oxidation by Chlorine

Ilmenite Chlorination: Usage of Gaseous Carbon Tetrachloride at Relatively Lower Temperatures

Chlorination of Synthetic Rutile with Carbon Tetrachloride at Low Temperature for Producing Titanium Tetrachloride

Electrolytic Synthesis of Ferrotitanium Powders from Ilmenite in CaCl2-NaCl Melts at a Lower Temperature of 700 °C

Removal of Iron from Titanium Ore through Selective Chlorination Using Magnesium Chloride

Carbochlorination of Low-Grade Titanium Slag to Titanium Tetrachloride in Molten Salt

Production of Titanium Dioxide Directly from Titanium Ore through Selective Chlorination Using Titanium Tetrachloride

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

Chlorination Behavior of Low-Grade Titanium Slag in AlCl3-NaCl Molten Salt

Thermodynamic Consideration of the Removal of Iron from Titanium Ore by Selective Chlorination

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Effect of NH4Cl on the rusting leaching behavior of metallic phase of iron in reduced ilmenite during TiO2 purification: An electrochemical and density-functional theory study

Production of High-Grade Titanium Dioxide Directly from Titanium Ore Using Titanium Scrap and Iron Chloride Waste

Thermodynamics on the reaction of carbochlorination of titania for getting titanium tetrachloride

Solvent Extraction of Titanium from Ilmenite Hydrochloric Acid Leachate: Optimization and Investigation of Extraction Reactions of All Contained Metal Ions

Research on the process and mechanism of preparing titanium-rich materials from complex ilmenite

Purification and Phase Evolution Mechanism of Titanium Oxycarbide (ticxoy) Produced by the Thermal Reduction of Ilmenite

Electro-Reduction of Ilmenite to Fe<sub>x</sub>Ti Alloys in Molten CaCl<sub>2</sub>

A Novel Technology for the Refinement of Low-Grade Ilmenite Concentrate