Abstract:Al2O3–Cr2O3 refractories have excellent slag corrosion resistance and can adapt to the oxidation/reduction atmosphere in the smelting reduction ironmaking furnace. Improving the corrosion resistance of chrome corundum refractories is of great significance for extending the life length of industrial kilns and decreasing carbon emissions. In this work, the influences of ZrO2 content on the phase evolution, microstructure, physicochemical properties, mechanical properties and slag corrosion resistance of the ZrO2 reinforced Al2O3–Cr2O3 composite refractories were investigated. The results show that the ZrO2 reinforced Al2O3–Cr2O3 composites are primarily composed of (Al, Cr)2O3 solid solution and m-ZrO2. The compressive strength, flexural strength and hardness of the composite refractories can be improved by adding 2.5 wt% ZrO2. However, adding more ZrO2 will reduce its mechanical properties. This is due to ZrO2 excessive content will augement the porosity of the composite refractories, and the phase transformation of ZrO2 will also lead to the formation of microcracks during the cooling process. It is worth noting that higher ZrO2 content improves the thermal shock resistance of the composites, which is primarily put down to the microcrack toughening mechanism of ZrO2. The corrosion tests show that the thicknesses of the corrosion and infiltration layers of composite refractories are significantly decreased accompanied by ZrO2 content increase. This is because the formation of high melting point CaZr4O9 reduces the CaO content and slag alkalinity, and inhibits the dissolution of Al2O3 into the slag to a certain extent. Therefore, the slag corrosion/penetration resistance of the of the composites are obviously improved with the increase of ZrO2 addition.

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Mechanisms responsible for enhancing low‐temperature oxidation resistance of nonstoichiometric (Zr,Ti)C

Effect of Ti Addition on the Microstructure and Mechanical Properties of Cast Mg-Gd-Y-Zn Alloys

Novel TiC-based composites with enhanced mechanical properties

Regulating mechanical and anti-erosion wear properties of ZTA ceramics by adjusting Y2O3 content

Microstructure and mechanical properties of dense ZTA ceramics with high Cr2O3 solution

Enhanced thermal shock resistance of ZrO2-reinforced Al2O3–CaAl12O19 composites prepared from ferrotitanium slag: Crack propagation resistance mechanisms

Effect of Y2O3 Addition on the Microstructure and Liquid LBE Cavitation Erosion Behaviors of Fe-Cr-Al-Ti-C-xY2O3 Laser Clade Coatings

Tribological properties and microstructures of Al2O3-TiC-TiB2 reinforced composites

Effect of WC addition on microstructure and properties of laser melting deposited Ti6Al4V

The influence of Ti-induced precipitates on the microstructure and mechanical properties of (Zr,W)C solid solution

Effect of the Y2O3 amount on the oxidation behavior of ZrB2-SiC-based coatings for carbon/carbon composites

Addition Effect of ZrC Nano-powder on the Microstructure and Mechanical Properties of TiCN-based Cermets Prepared by Spark Plasma Sintering

Effects of Y2O3 on the Densification and Fracture Toughness of SPS-sintered TiC

Effect of abrasive particle size on the abrasion resistant performance of ZTA ceramics

Effect of nano-oxides on corrosion resistance of Al2O3–ZrO2–C material

Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air

Microstructure, phase evolution, mechanical properties and slag corrosion resistance of ZrO2 reinforced Al2O3–Cr2O3 composites

Effects of Zr Content on the Microstructure and Performance of TiMoNbZrx High-Entropy Alloys

Abrasive Wear and Physical Properties of In-Situ Nano-TiCx Reinforced Cu–Cr–Zr Composites

Preparation of in-situ synthesized TiC/AlSi30Cu5 coating by high velocity oxy-fuel (HVOF) spraying: Microstructure evolution, mechanical properties, and tribological behavior