Abstract:The isothermal oxidation behavior of Ti3AlC2 based material containing 5 vol% TiC inclusion in air had been investigated at 500–900 °C by means of TGA, XRD, Raman spectroscopy and SEM/EDS. It was demonstrated that, although Ti3AlC2 based material exhibited good oxidation resistance at temperatures above 700 °C, anomalous oxidation with higher oxidation rate occurred at lower temperatures of 500 and 600 °C. This interesting phenomenon was due to the formation of microcracks associated with the stress developed within the scales, mainly consisting of anatase, and the volume expansion as Ti3AlC2 based material was directly exposed to air at those temperatures. Its oxidation, at temperatures investigated with the exception of 600 °C, generally obeyed a parabolic rate law. The weight gain data for the remaining temperatures were analyzed with an instantaneous parabolic rate constant method by assuming a parabolic rate law. The variations of instantaneous parabolic rate constant with time reflected the complexity of the oxidation behavior of Ti3AlC2 based material. These variations were discussed from the viewpoint of the formation of microcracks at 500 °C, and preferred oxidation of TiC inclusion in the initial oxidation and its subsequent depletion at 800 and 900 °C on the basis of X-ray diffraction, Raman spectroscopy, SEM scale morphology observation and composition analysis using EDS. In addition, the deleterious effect of TiC inclusion on the oxidation resistance of Ti3AlC2 based material was also investigated and discussed with comparison to monolithic Ti3AlC2, which was helpful to understand the discrepancies in reports on the oxidation of Ti3AlC2.

Mechanisms responsible for enhancing low‐temperature oxidation resistance of nonstoichiometric (Zr,Ti)C

Oxidation behavior of non-stoichiometric (Zr,Hf,Ti)Cx carbide solid solution powders in air

Improving the Comprehensive Properties of ZrO2–C Materials with Aid of TiO2 Addition

Low-Temperature Oxidation Behavior of (Zr1/3Nb1/3Ti1/3)C Solid-Solution Ceramics in Air

Oxidation Resistance of Zr2(Al(Si))4C5-based Composites at Ultra-High Temperature

Sub-stoichiometry-facilitated Oxidation Kinetics in a Δ-Tixc-doped Ti-based Alloy

Microstructure evolution during oxidation of quinary Ti 3 (AlSiSn)C 2 at high temperatures and induced probable performance

Oxidation Behavior of TiC-containing Ti3AlC2based Material at 500–900 °C in Air

Carbon Vacancies Enhanced Oxidation Resistance of High-Entropy Carbides (ti0.2v0.2nb0.2mo0.2w0. 2)Cx

Characteristics and Mechanisms of Dynamic Oxidation for Zrb2-Sic Based Uhtc

Oxidation Behaviour of C–SiC–ZrC Composite

Oxidation behavior and kinetics of (Zr, Ti)(C, N)–SiC ceramics with enhanced oxidation resistance at 850 °C–950 °C

Design and Preparation of an Ultra-High Temperature Ceramic by In-Situ Introduction of Zr2[Al(Si)]4C5 into ZrB2-SiC: Investigation on the Mechanical Properties and Oxidation Behavior

High‐temperature Oxidation Behavior of (hf0.2zr0.2ta0.2nb0.2ti0.2)c High‐entropy Ceramics in Air

Synthesis and Characterization of ZrCx Coatings with Different Stoichiometry

Oxidation Kinetics of in Situ Synthesized TiC/Ti Matrix Composites at Elevated Temperature

Influence of TiC contents on the microstructure, mechanical properties, and oxidation behavior of Mo–10Si–8B alloys

Non-isothermal Oxidation and Ignition Prediction of Ti-Cr Alloys

Structure and Oxidation Behavior of Multicomponent (Hf,Zr,Ti,Nb,Mo)C Carbide Ceramics

Long-term Oxidation of Ti3Al0.8Sn0.2C2 in Air at 1200 °C