Abstract:Titanium metal is primarily produced via the Kroll process, which is characterized by a semi-continuous production flow and a lengthy process cycle, resulting in high production costs. Researchers have explored alternative methods for titanium production, including molten salt electrolysis, such as the Fray–Farthing–Chen (FFC), Ono Suzuki (OS), and University of Science and Technology Beijing (USTB) processes, aiming to achieve more economical production. Among these, the USTB process, a representative of soluble anode electrolysis, has shown significant promise. However, controlling oxygen concentration in titanium produced by soluble anode electrolysis remains a challenge. This study proposes a novel approach to enhance deoxidation efficiency in soluble anode electrolysis for titanium production by introducing yttrium chloride (YCl3) into the molten salt electrolyte. Thermodynamic analysis and experimental validation demonstrate that the theoretical deoxidation limit for titanium can reach below 100 ppm under Y/YOCl/YCl3 equilibrium. We report the successful synthesis of titanium powder with an oxygen concentration of 6000 ppm from titanium-carbon-oxygen solid solution. Under optimized conditions, the purity of the titanium powder reached 99.42%, demonstrating a new approach for producing high-purity titanium. This method, based on soluble anode electrolysis, offers a potential alternative to the conventional Kroll process. The research elucidates the fabrication process and analytical methods for titanium-carbon-oxygen solid solution, and employs a combination of analytical techniques, including XRD, SEM-EDS, and ONH Analyzer, for characterization of the electrolytic product, encompassing phase analysis, microstructure, and oxygen concentration testing.

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-Rich Slag in Molten CaCl2

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Preparation of TiC/SiC composites from Ti-enriched slag by an electrochemical process in molten salts

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

A novel preparation of titanium dioxide from titanium slag

Carbochlorination of Low-Grade Titanium Slag to Titanium Tetrachloride in Molten Salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Preparation of rutile titanium dioxide pigment from low-grade titanium slag pretreated by the NaOH molten salt method

Selective enrichment and extraction of well-catalyzed perovskites on melting-microwave heating process from blast furnace slag

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

New Method for Low-Cost Titanium Production

Extraction of titanium from different titania precursors by the FFC Cambridge process

Extraction of Valuable Metals from Titanium-bearing Blast Furnace Slag by Acid Leaching

Electro-Reduction of Ilmenite to Fe<sub>x</sub>Ti Alloys in Molten CaCl<sub>2</sub>

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Preparation of Titanium by Electro-deoxidation of CaTiO3 in a Molten CaCl2-NaCl Salt

Electrosynthesis of Titanium from High-Titanium Slag with Short-Process in Molten CaCl2

Electrochemical Preparation of Ti5Si3/TiC Composite from Titanium-Rich Slag in Molten CaCl2

Preparation of Ferrotitanium from Ilmenite by Electrolysis-Assisted Calciothermic Reduction in CaCl2-NaCl Molten Salt

Preparation of Titanium Metal by Deoxygenation Under KCl-NaCl-YCl3 System Using Soluble Anode

Preparation of TiC/SiC composites from Ti-enriched slag by an electrochemical process in molten salts

Preparation of Ferrotitanium Alloy from Ilmenite by Electrochemical Reduction in Chloride Molten Salts

A novel preparation of titanium dioxide from titanium slag

Carbochlorination of Low-Grade Titanium Slag to Titanium Tetrachloride in Molten Salt

Electrochemical extraction of titanium from carbon-doped titanium dioxide precursors by electrolysis in chloride molten salt

Preparation of rutile titanium dioxide pigment from low-grade titanium slag pretreated by the NaOH molten salt method

Selective enrichment and extraction of well-catalyzed perovskites on melting-microwave heating process from blast furnace slag

A novel process for preparation of titanium dioxide from Ti-bearing electric furnace slag: NH4HF2-HF leaching and hydrolyzing process

Investigation of the Electrochemical Reduction of Porous CaTiO 3 Pellets in CaCl 2 -0.5%CaO Molten Salt

Synthesis of micro-FeTi powders by direct electrochemical reduction of ilmenite in CaCl2-NaCl molten salt

New Method for Low-Cost Titanium Production

Extraction of titanium from different titania precursors by the FFC Cambridge process

Extraction of Valuable Metals from Titanium-bearing Blast Furnace Slag by Acid Leaching

Electro-Reduction of Ilmenite to Fe&lt;sub&gt;x&lt;/sub&gt;Ti Alloys in Molten CaCl&lt;sub&gt;2&lt;/sub&gt;

Electro-Reduction of Ilmenite to Fe<sub>x</sub>Ti Alloys in Molten CaCl<sub>2</sub>